In Idaho we have to have a minimum 400 grains for arrow weight for hunting. We also need to have no more than 65% let off. What are the other state's minimums if any?

300 grains or 6 grains per pound of draw weight here in Washington.

wisconsins only regulation i believe is 30 lb. draw weight

In Ohio there is only a min weight 45 lb I think.

In Illinois it is a min. of 40# draw weight. And a min. of a 20" arrow with min. 7/8" broadhead.

Colorado is 35 pounds draw weight, minimum two steel blades, each blade must be in the same plane throughout its entire length, 7/8" minimum width.

35# minimum draw and 7/8" minimum cutting diameter.....mechs are legal as long as their open diameter is 7/8" or larger. All boradheads must have a minimum of two cutting surfaces in the same plane. We went through a deal here last year where Crimson Talons were originally illegal because of the curve in the blades....those heads have since been made legal....I think it was made legal just a couple of days before archery season if memory serves. Those are PA's regs.