CVA Bocat - update #1
#1
Well, gone about as far as I can for now. Would like to add some brass wedge plates and buttplate (still looking for those). Here are some pics of the project:
This is the stock version

Barrel, lock and hardware installed as soon as the stock came in

Having decided to reblue the barrel, here it is in the white

Bluing completed

It came out better than I had hoped. Tried something a little different in the process: 1) 220 wet dry, 2) 320 fastcut emory cloth, 3) 0000 steel wool, and something new, 4) white vinegar wipe down. I heard about using the vinegar somewhere a while back - being a weak acid, it apparently finely etches the surface and makes the bluing work better. Well, it did - best job I've done to date.
Here it is with everything in place and the new sights installed



Fired a couple shots thru it yesterday at 15 yards using some TC Cheap Shots and 75 gr P-RS - they were on paper but I wasn't too concerned about the accuracy - need to pick up some hunting sabots and work up a load. I use the Cheap Shots for plinking and when I let anyone else shoot it.
This is the stock version

Barrel, lock and hardware installed as soon as the stock came in

Having decided to reblue the barrel, here it is in the white

Bluing completed

It came out better than I had hoped. Tried something a little different in the process: 1) 220 wet dry, 2) 320 fastcut emory cloth, 3) 0000 steel wool, and something new, 4) white vinegar wipe down. I heard about using the vinegar somewhere a while back - being a weak acid, it apparently finely etches the surface and makes the bluing work better. Well, it did - best job I've done to date.
Here it is with everything in place and the new sights installed



Fired a couple shots thru it yesterday at 15 yards using some TC Cheap Shots and 75 gr P-RS - they were on paper but I wasn't too concerned about the accuracy - need to pick up some hunting sabots and work up a load. I use the Cheap Shots for plinking and when I let anyone else shoot it.
#5
ORIGINAL: MountainDevil54
darn nice looking rifle. I love that stock too. What product did you use to re-blue the barrel?
darn nice looking rifle. I love that stock too. What product did you use to re-blue the barrel?
I had one of those ever increasing frequent moments of insanity regarding the stock - almost stripped it down and redid it with cherry & dark walnut stain. But, the more I think of that . . . would look pretty good that way with a little polished brass.
#6
ORIGINAL: Semisane
Nice. Looks like one of those rifles you can carry all day.
Nice. Looks like one of those rifles you can carry all day.
It is noticeably heavier, but balances more rearward(a big plus for me and my shoulder).BTW, the shotsI made yesterday was the first smoke I've made in quite a while (only got cleared to shoot , off a rest only, by my surgeon a couple weeks ago). As it happened, there was a slight breeze blowing in my face and . . . my wife thought I was nuts just sitting there with all that smoke around me
Thread
Thread Starter
Forum
Replies
Last Post
doughboysigep
Trail Cameras
14
03-25-2007 10:35 AM
Buck Magnet
Bowhunting
34
02-22-2006 08:25 PM




