Community
Waterfowl Hunting Receive the benefit of experienced duck and goose hunters in this waterfowl forum.

Hevi Shot choke tubes?

Thread Tools
 
Old 01-12-2005, 09:11 AM
  #1  
Thread Starter
 
Join Date: Aug 2004
Location:
Posts: 309
Default Hevi Shot choke tubes?

Will Hevi Shot pattern well out of a Choke Designed for steel, Or do you need a choke designed for Hevi Shot? This is for pass shooting Geese. I need a real tight pattern to drop em. I have full and etra full for steel and modifyed and full for lead. Havent got a chance to pattern them yet.
gandilamont is offline  
Old 01-12-2005, 02:12 PM
  #2  
Nontypical Buck
 
johnch's Avatar
 
Join Date: Jun 2004
Location: NW Ohio , 5 min from Ottawa National / Magee Marsh
Posts: 2,051
Default RE: Hevi Shot choke tubes?

I bet you have a 835 or 935 Mossberg
Yes a steel shot tube will work .
BUT Hevi shot patterns so tight that I would not recomend them.
I recomend that you go no tighter than the MOD .
Pattern that tube and I bet you will like the results .
I use a Rem 870 and only shoot a Mod for pass shooting and it is to tight if I was to shoot decoying birds.

Even with Hevi shot ,Please be ethical no HAIL MARRY shooting , try and use 60 yds as a max.

From your Member details you are 100 years old , think you need to update it ??
johnch is offline  
Old 01-12-2005, 02:34 PM
  #3  
Thread Starter
 
Join Date: Aug 2004
Location:
Posts: 309
Default RE: Hevi Shot choke tubes?

Accually I do have a 835 but only use it for turkey. I shoot a Remington "Spartan" O/U for waterfowl. It came with real short lead only choke tubes so I bought a full set of after market extended chokes for steel which I want to pattern w/hevi shot. I will pattern #4, #2. and B's. I want a real tight pattern for those passing Geese.
gandilamont is offline  
Old 01-12-2005, 04:49 PM
  #4  
Nontypical Buck
 
johnch's Avatar
 
Join Date: Jun 2004
Location: NW Ohio , 5 min from Ottawa National / Magee Marsh
Posts: 2,051
Default RE: Hevi Shot choke tubes?

I know the gun ,it's made be Baikal ,I have a 20 gau O/U
Check inside diamiter of the steel shot tubes .
Dose 1 of them measure close to the lead only MOD tube if so I would try it .
Hevi shot patterns real tight so a Mod tube = full ,IC = a tight mod and Skeet = a mod.
If you over choke Hevi shot the over all pattern will loosen up with a real dense center.
For geese I use #2 reloads that are a little faster than the Rem 3" 1 3/8 oz load
Are you reloading the Hevi shot ?
I use Reloading specialties data ,because their loads are lots faster than Balistic products.
If so I use the 3" Cheddite hull .
I found that the 1 1/2 oz load did not pattern realy any tighter than the 1 3/8 oz load
The BB loads will give you extra range ,but I found that it tore up closer geese . I only load 1 goose load.
For ducks I use 2 3/4 " Fed gold medal hulls with 1 1/4 oz of 6,5,or 4 for ducks ,the 4 load works good for decoying geese
I also load 1 1/8 oz of 7 for teal and decoying ducks
johnch is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wholelottagobble
Turkey Hunting
5
03-29-2005 01:42 PM
wholelottagobble
Turkey Hunting
8
01-20-2005 06:24 PM
arffslug
Turkey Hunting
17
05-07-2004 05:37 PM
DoninVa
Turkey Hunting
7
01-27-2004 07:38 PM
dsheally
Turkey Hunting
9
02-25-2003 01:50 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Quick Reply: Hevi Shot choke tubes?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.