Bow update
06-01-2004 | 01:05 PM
#1
Thread Starter
Nontypical Buck
Joined: Feb 2003
Posts: 2,994
Likes: 0
From:
Bow update
Well, after getting WWAG's most excellent press and finally getting around to working on my bow, it's somewhere I don't think it's ever been since I owned it- In spec 
Everything is dead on right now. It's amazing how the FDC feels different, holding characteristics, etc. It needs a serious re-tune, as my nocking point is now almost 1/2" off, but things are looking up. Once re-tuned, I'll set the chrony up to see what if anything I gained/lost. During this process, I'll hopefully be able to get a good feel for what the NVs are doing for it.
On to round #2...
Everything is dead on right now. It's amazing how the FDC feels different, holding characteristics, etc. It needs a serious re-tune, as my nocking point is now almost 1/2" off, but things are looking up. Once re-tuned, I'll set the chrony up to see what if anything I gained/lost. During this process, I'll hopefully be able to get a good feel for what the NVs are doing for it.
On to round #2...
06-02-2004 | 06:07 AM
#2
Boone & Crockett
Joined: Feb 2003
Posts: 12,157
Likes: 0
From: Lehigh County PA USA
RE: Bow update
Isn't it nice to be able to tinker with your setup until you are entirely happy with it? I know I would feel very frustrated if I was not able to do this as well.
Let us know how it goes.
Let us know how it goes.
06-02-2004 | 07:24 AM
#3
Thread Starter
Nontypical Buck
Joined: Feb 2003
Posts: 2,994
Likes: 0
From:
RE: Bow update
ORIGINAL: PABowhntr
Isn't it nice to be able to tinker with your setup until you are entirely happy with it? I know I would feel very frustrated if I was not able to do this as well.
Isn't it nice to be able to tinker with your setup until you are entirely happy with it? I know I would feel very frustrated if I was not able to do this as well.
Let us know how it goes.
06-02-2004 | 08:42 AM
#5
Thread Starter
Nontypical Buck
Joined: Feb 2003
Posts: 2,994
Likes: 0
From:
RE: Bow update
What did you do to have your nocking point change by 1/2"? Is that from string/cable twisting?
My ATA was off 1/2" and my brace by almost as much. Remember, the "proshop" yahoos had me seriously out of whack...
06-02-2004 | 11:24 AM
#7
Fork Horn
Joined: Feb 2003
Posts: 499
Likes: 0
From: Kenosha, Wi USA
RE: Bow update
My ATA was off 1/2" and my brace by almost as much. Remember, the "proshop" yahoos had me seriously out of whack...
Now that you have a bow press, imagine what you could do with a nice scale..... [8D]
(i never give up)....
06-02-2004 | 11:35 AM
#9
Fork Horn
Joined: Feb 2003
Posts: 499
Likes: 0
From: Kenosha, Wi USA
RE: Bow update
How in the heck did you miss this deal for $20?
http://216.7.172.165/vb/showthread.p...ighlight=scale
http://216.7.172.165/vb/showthread.p...ighlight=scale
Thread
Thread Starter
Forum
Replies
Last Post
doughboysigep
Trail Cameras
14
03-25-2007 10:35 AM
Buck Magnet
Bowhunting
34
02-22-2006 08:25 PM
