Fletch hitting cables
09-10-2008 | 07:29 PM
#1
Thread Starter
Fork Horn
Joined: Oct 2007
Posts: 144
Likes: 0
Fletch hitting cables
My wife shoots a diamond edge and the blazer vanes hit the cables by about 1/16 of an inch. Can anyone recommend a cable slide that will pull the cables tighter to the rod? Can I put the cables on the other side of the rod?
09-10-2008 | 07:59 PM
#2
Joined: Mar 2008
Posts: 214
Likes: 0
From:
RE: Fletch hitting cables
If the diamond slides are like the Bowtech stock slides (which I think they are) go with the Hicks 70-10 3D slide sold at Lancaster archery. They are only like $4.99 plus shipping. They pull the cables over a little more for clearance, but they don't pull over as much as the Sims or Saunders, etc. Pulling over too much will cause excessive lean. Go with the Hicks. It should give you plenty of clearance for what you need.
