Fletch hitting cables
 

My wife shoots a diamond edge and the blazer vanes hit the cables by about 1/16 of an inch. Can anyone recommend a cable slide that will pull the cables tighter to the rod? Can I put the cables on the other side of the rod?

RE: Fletch hitting cables
 

If the diamond slides are like the Bowtech stock slides (which I think they are) go with the Hicks 70-10 3D slide sold at Lancaster archery. They are only like $4.99 plus shipping. They pull the cables over a little more for clearance, but they don't pull over as much as the Sims or Saunders, etc. Pulling over too much will cause excessive lean. Go with the Hicks. It should give you plenty of clearance for what you need.