need some advise with my set up. [sq2 and gt]
#11
Thread Starter
Joined: Feb 2003
Posts: 27
Likes: 0
From: joliet illinois USA
yes jimmy i have the tru peep and also the sting leeches,but i do use a kisser button. the other you have mention about the cam,i'am not sure what you are asking?? because this bow is so short from axel to axel and the brace height is longer should this matter??
#12
there are 2 small holes in the bottom cam with a strait edge or string going thru them it is supose to line up level to your string
We all have different oppinions , if we did'nt the world would be a BORING place
We all have different oppinions , if we did'nt the world would be a BORING place
#14
Fork Horn
Joined: Feb 2003
Posts: 147
Likes: 0
From: patten.maine usa
I dunno ITH1,I had a similar experience with gold tips this season.I took a buck quartering to with the leading leg back.Hit him forward of the leg and got about 7" of penetration with a 100gr Muzzy 4 blade.Unless I hit the forward shoulder plate,ribs should have been the only issue.Makes me really consider going back to the XX78.I shoot an FX @60lbs @27".The shot was 25 yds.Ron
#15
If you can shoot acurately without the kisser I'd take it off . and if you want a head that will penitrate look at the magnus blades they will shoot thru about anything .
We all have different oppinions , if we did'nt the world would be a BORING place
We all have different oppinions , if we did'nt the world would be a BORING place
#16
Joined: Feb 2003
Posts: 33
Likes: 0
From: strattanville pa. USA
everywhere i have read they say that 50 lbs. is adequete for deer sized game and at 49.67 you guys are gonna say not enough, come on now.....but i would agree with the go to a fixed blade head. probably a cut on cantact head like the steelforce or nugent blade....




