Those of you with the DVD, what affect does shortening or lenghtening the slide arm have on the rest? I was told lengthen speeds the drop and shorten slows it. Does the DVD mentions this?

Sigfla, check your e-mail... I saw where the technical advisor (who's also the one who made the DVD) answered your e-mail... He explains that you basically want the screw which controls eleveation to come up and contact the stop plate during the last inch or so of draw. If you do that, eveything will be fine.

He also left his direct number for you; I'd call him if you had any more questions. Nothing like talking directly to the man who made the DVD!!

Don't have an email Greg. Are you referring to my inbox here on the board? My regular e-mail account has no response from Muzzy in my inbox.

This thing shoots great but after shooting some virgin shafts I see I still have contact. Tried vane down and up. Twsited my knocks, still had contact. Will try and adjust the arm and see if I can get it to clear.

That's pretty great customer service if the guy who made the DVD is the one responding to concerns - I like Muzzy better and better all the time!

Ok, my fault I forgot which e-mail I used when I registered with the site. Muzzy did respond and attached the instruction sheet for me. Very prompt and polite service from Muzzy. And thanks again Greg.

Rest is fixed. Just shot 4 arrows and the fletching looks brand new on each. Instructions helped alot. The shop had just tightened the rest arm a bit too much on my riser and it was holding the drop enough to cause my contact. Too bad I messed up some vanes before I got it right. No matter I tore a few while sighting in. My center shot was altered by the adjustment but I will fix that in a jiffy. Thanks again Muzzy. I just talked my buddy into on of your rests also for his bow. We are all dropping the WB's.