Ultimate hunting arrow setup
#21
Joined: Jul 2003
Posts: 547
Likes: 0
From: baltimore,md
My set-up are the Beman MAX-4,400's,cut @29in.Three 4" Duravanes(one yellow,two whites)with a hard right hand helical and either the NAP 100gr Spitfire Pro's or a fixed Muzzy 100gr.Total weight-448gr @64lbs.,which gives 261fps and KE of about 69lbs.
Bt the way,this is coming out of a Hoyt VTEC with 30 1/2 draw...Bob
Bt the way,this is coming out of a Hoyt VTEC with 30 1/2 draw...Bob
#22
ORIGINAL: JoshKeller
Carbon Express Terminator Hunter Selects 60/75.
3 blazer orange vanes
white spray laquer crest
montec 100 grain
Carbon Express Terminator Hunter Selects 60/75.
3 blazer orange vanes
white spray laquer crest
montec 100 grain
#24
See below for setup for deer. For Elk and larger game I would use thunderhead 100 or 125gr. fixed blade broadheads. Same bow and other eqpt. I only have one setup.
#27
Joined: Dec 2003
Posts: 316
Likes: 0
From: Kansas
ORIGINAL: hunter9022
29 1/2" Gold tip XT 7595, 100 grain magnus nuge blade broadhead, 3 4" tru-flite feathers, and easton nocks. These things will shoot through a brick wall and still be ready to go.
29 1/2" Gold tip XT 7595, 100 grain magnus nuge blade broadhead, 3 4" tru-flite feathers, and easton nocks. These things will shoot through a brick wall and still be ready to go.
JMAC
#28
Fork Horn
Joined: May 2006
Posts: 397
Likes: 0
From: Grand Rapids, MI
28.5" Carbon Express CX 400 3D Selects wrapped with red/white fade with 3 Flour. Yellow feathers. White nocks. Broadheads will be using are either the new G5or my trusty Muzzy 100 4 blades. Maybe Lumanocks again but not sure.





