HeadHunter4

I just bought a brand new PSE flash with a golden key funnel rest. I also bought a dozen of the carbon fury 250 arrows and 100g thunderheads. My bow is 28" draw and 70lb pullback and it has a min. grain arrow of 420. I was wondering if these new arrows will be the right grain and be good for my setup? Thanks


HeadHunter4

adams

I searched the bass pro site and couldn't find a weight per inch. How long are your shafts? Do you know what the weight per inch?

I could only find sizes 4560 (10 gpi) 6075 (11gpi)

bowhuntt

250 is the same as the 4560 that means 10 gr per in

adams

I'll guess your arrow length to be 29 inches. Please correct me if I'm wrong.

Shaft 290g
insert 15g
nock 12g
Vanes 24g
head 100g

Total arrow weight 441g. You look fine as far as weight.

If the 250 and the 4560 are infact the same shaft you appear to be underspined though and that could make tunning difficult.

see sizing chart: http://www.basspro.com/servlet/catal...earch&hvarAID=

HeadHunter4

My old arrow lengths are 27.5" so that should help the spine of my shafts right? Do you know for sure that the knock, insert, and vanes are that exact grain on the carbon furys? Thanks


HeadHunter4