talked out of a ripcord
01-06-2008 | 12:10 PM
#12
Giant Nontypical
Joined: Jun 2007
Posts: 7,367
Likes: 0
From:
RE: talked out of a ripcord
ORIGINAL: Roskoe
Dan - what is it about the ripcord you like better than the QAD?
Dan - what is it about the ripcord you like better than the QAD?
I don't think so! I'm not changing the tune ona bow to over come the short comings of a rest. The last one I tried was a QAD LD. I still sell the QAD but I won't recommend them. Sometimes they do work great, but sometimes in my book isn't good enough.
I've had more than one issue with the QAD rests
Dan
01-06-2008 | 01:18 PM
#13
Guest
Posts: n/a
RE: talked out of a ripcord
I have heard all the talk of clearance issues with the QAD. So I was hesitate. But I put it on my commander, and it took litterly 10 shots or less to tune. That was impressive to me. It wasn't however dead even arrow balance as some say with binary cams, my nock is raised just a tad over center.
01-06-2008 | 01:41 PM
#14
Giant Nontypical
Joined: Jun 2007
Posts: 7,367
Likes: 0
From:
RE: talked out of a ripcord
ORIGINAL: bigcountry
I have heard all the talk of clearance issues with the QAD. So I was hesitate. But I put it on my commander, and it took litterly 10 shots or less to tune. That was impressive to me. It wasn't however dead even arrow balance as some say with binary cams, my nock is raised just a tad over center.
I have heard all the talk of clearance issues with the QAD. So I was hesitate. But I put it on my commander, and it took litterly 10 shots or less to tune. That was impressive to me. It wasn't however dead even arrow balance as some say with binary cams, my nock is raised just a tad over center.
Dan
01-06-2008 | 04:38 PM
#15
Joined: Mar 2007
Posts: 33
Likes: 0
RE: talked out of a ripcord
ive been using the rip cord for a few years now and have never had a problem.was thinking of buying the new trophy taker full containment but just cause i like to change things up every once in a while,but decided that the ripcord was still working to good to be replaced.
01-07-2008 | 08:10 AM
#16
Guest
Posts: n/a
RE: talked out of a ripcord
ORIGINAL: MeanV2
Glad you had a good experience. That is not always the case
Dan
ORIGINAL: bigcountry
I have heard all the talk of clearance issues with the QAD. So I was hesitate. But I put it on my commander, and it took litterly 10 shots or less to tune. That was impressive to me. It wasn't however dead even arrow balance as some say with binary cams, my nock is raised just a tad over center.
I have heard all the talk of clearance issues with the QAD. So I was hesitate. But I put it on my commander, and it took litterly 10 shots or less to tune. That was impressive to me. It wasn't however dead even arrow balance as some say with binary cams, my nock is raised just a tad over center.
Dan
One thing I will say about both ripcord and the QAD. The stupid bar is not needed. All it can do is cause you issues. And if you have problems with your arrow jumping out of the deep fork, there are other issues at play here.I need to replace the MZE onmy older liberty and trying to decide to give the limbdriver another try. One thing it does not have is total containment.
01-07-2008 | 08:17 AM
#17
Giant Nontypical
Joined: Jun 2007
Posts: 7,367
Likes: 0
From:
RE: talked out of a ripcord
ORIGINAL: bigcountry
Dan, I notice they added some good horizontial adjustments to the limbdriver finally. The first ones I looked at, didn't have this. I don't like anything where you have to change the fork angle for horizontial adjustments.
One thing I will say about both ripcord and the QAD. The stupid bar is not needed. All it can do is cause you issues. And if you have problems with your arrow jumping out of the deep fork, there are other issues at play here.I need to replace the MZE onmy older liberty and trying to decide to give the limbdriver another try. One thing it does not have is total containment.
Dan, I notice they added some good horizontial adjustments to the limbdriver finally. The first ones I looked at, didn't have this. I don't like anything where you have to change the fork angle for horizontial adjustments.
One thing I will say about both ripcord and the QAD. The stupid bar is not needed. All it can do is cause you issues. And if you have problems with your arrow jumping out of the deep fork, there are other issues at play here.I need to replace the MZE onmy older liberty and trying to decide to give the limbdriver another try. One thing it does not have is total containment.
The fork on the Limb Driver is now also pretty deep. I can't imagine an arrow getting out of there
Dan
