New Shop Additions
10-31-2008 | 05:32 AM
#11
Giant Nontypical
Joined: May 2005
Posts: 5,973
Likes: 0
From: One mile east of West Podunk Tx
RE: New Shop Additions
ORIGINAL: Centxrecurve
What size motor do you need I can get motors fairly cheap If I dont have one laying around. As long as its 825-1100 rpm range. 1/4hp to3/4 hp real easy
ORIGINAL: burniegoeasily
I’m jealous. I’m in need of a new drum sander. Well, actually I think I’m going to get a new motor for the lam gig I made. It would be much cheaper. That is, once I quit playing with the self bows. I know I keep saying Im going to get back into the plywood bow buisness. It would save me a butt load of time. I just like the elegance of a board, or self bow. Besides, I’ve got some snake skins waiting for some snaky Osage bows next spring.
I’m jealous. I’m in need of a new drum sander. Well, actually I think I’m going to get a new motor for the lam gig I made. It would be much cheaper. That is, once I quit playing with the self bows. I know I keep saying Im going to get back into the plywood bow buisness. It would save me a butt load of time. I just like the elegance of a board, or self bow. Besides, I’ve got some snake skins waiting for some snaky Osage bows next spring.
Also right behind the $200 rolling deer camp is a nice Osage tree with a limb thats about 7' long and pretty straight. I think I'll cut it down this weekend. Maybe we can meet up in abilene over the winter so I can get 1/2 the staves to you. Of course there will be a hunt involved out there.
10-31-2008 | 07:32 AM
#12
Dominant Buck
Joined: Feb 2003
Posts: 26,274
Likes: 0
From: land of the Lilliputians, In the state of insanity
RE: New Shop Additions
ORIGINAL: txjourneyman
Me too Kent. I have several different small motors laying around. Let me know what HP you are looking for.
Also right behind the $200 rolling deer camp is a nice Osage tree with a limb thats about 7' long and pretty straight. I think I'll cut it down this weekend. Maybe we can meet up in abilene over the winter so I can get 1/2 the staves to you. Of course there will be a hunt involved out there.
ORIGINAL: Centxrecurve
What size motor do you need I can get motors fairly cheap If I dont have one laying around. As long as its 825-1100 rpm range. 1/4hp to3/4 hp real easy
ORIGINAL: burniegoeasily
I’m jealous. I’m in need of a new drum sander. Well, actually I think I’m going to get a new motor for the lam gig I made. It would be much cheaper. That is, once I quit playing with the self bows. I know I keep saying Im going to get back into the plywood bow buisness. It would save me a butt load of time. I just like the elegance of a board, or self bow. Besides, I’ve got some snake skins waiting for some snaky Osage bows next spring.
I’m jealous. I’m in need of a new drum sander. Well, actually I think I’m going to get a new motor for the lam gig I made. It would be much cheaper. That is, once I quit playing with the self bows. I know I keep saying Im going to get back into the plywood bow buisness. It would save me a butt load of time. I just like the elegance of a board, or self bow. Besides, I’ve got some snake skins waiting for some snaky Osage bows next spring.
Also right behind the $200 rolling deer camp is a nice Osage tree with a limb thats about 7' long and pretty straight. I think I'll cut it down this weekend. Maybe we can meet up in abilene over the winter so I can get 1/2 the staves to you. Of course there will be a hunt involved out there.
Tx
you bet. Im up for hunting just about any time. Your place above Ft. Phantom is not far at all from my house. And if you feel froggy, my land is another hour west in Jayton.
10-31-2008 | 12:15 PM
#13
Thread Starter
Giant Nontypical
Joined: Feb 2003
Posts: 6,455
Likes: 0
From: Burleson TX USA
RE: New Shop Additions
You guy's start ya own thread and stop jackin mine[8D]
Just ripped up some more lams have not put the tapers in them yet.
What ya'll think?
I was thinking about doing a diaginal cut from top to bottom on each one then glueing the 2 different colors into 1 lam
Just ripped up some more lams have not put the tapers in them yet.
What ya'll think?
I was thinking about doing a diaginal cut from top to bottom on each one then glueing the 2 different colors into 1 lam
