bowtech hush kit ques?
#1
Thread Starter
Joined: Nov 2004
Posts: 104
Likes: 0
From:
for all you bowtechies out there i noticed that the string silencers from hush kit make a twang.....well not th silencer but the string only when the silencer slips down onto the part of the string that has no serving
i am thinkin of cutting them off and using the sims leaches or can i glue the hush kit silencer to where its quiet?
what ya thing
otto
i am thinkin of cutting them off and using the sims leaches or can i glue the hush kit silencer to where its quiet?
what ya thing
otto
#2
Joined: Feb 2003
Posts: 391
Likes: 0
From: Cincinnati, Ohio
I never had a problem with mine slipping. I shot the legs off of them before I had any other problems. Replaced them with Leaches after they wore out & both seem to work equally as well.
But to answer your question I would not glue them in place. Either replace them with leaches or something similar, or tie on a small nock point on either side of where you want them to stay so they can't slide.
But to answer your question I would not glue them in place. Either replace them with leaches or something similar, or tie on a small nock point on either side of where you want them to stay so they can't slide.




