Tune A Nocks
05-19-2004 | 06:57 PM
#11
Thread Starter
Joined: Sep 2003
Posts: 932
Likes: 0
From: North Texas
RE: Tune A Nocks
The Tune-a Nock F/S fits the Easton Super Uni bushings. Do the Axis arrows not have this system?
05-19-2004 | 07:34 PM
#12
Nontypical Buck
Joined: Feb 2003
Posts: 3,058
Likes: 0
From: CT, USA
RE: Tune A Nocks
They definitely will NOT work on the ST AXIS. Much smaller ID on the AXIS compared to the Super UNi-nocks the Tune-a-nocks are designed to replace.
I still have some of the tune-a nocks. They tend to produce a very weak arrow spine reaction due to how loose they are on most center servings. Get the spine correct and they shoot quite well, but I never saw a speed increase.
They work great with a loop and a peg style loop only head (e.e Scott Rhino) for getting the absolute maximum draw length out of a bow. But I'd rather have a uni-bushing as the tune a nocks are kind of soft and ding very easily (they also will crack some of the slightly smaller inside diameter IC type shafts..like CX, when installing them).
I still have some of the tune-a nocks. They tend to produce a very weak arrow spine reaction due to how loose they are on most center servings. Get the spine correct and they shoot quite well, but I never saw a speed increase.
They work great with a loop and a peg style loop only head (e.e Scott Rhino) for getting the absolute maximum draw length out of a bow. But I'd rather have a uni-bushing as the tune a nocks are kind of soft and ding very easily (they also will crack some of the slightly smaller inside diameter IC type shafts..like CX, when installing them).
