2004 BowTech Owners Manuals are available...
#11
Join Date: Feb 2003
Location: Staffordsville KY USA
Posts: 254
RE: 2004 BowTech Owners Manuals are available...
Thanks Pat, I'm going to shorten my draw length and see if that doesn't help my shoulder, I think I have been stressing to much with this 28.5 draw. I may loose a few fps but it will help if I shoot smooth.
#12
Join Date: Feb 2003
Location: East Yapank NY USA
Posts: 3,457
RE: 2004 BowTech Owners Manuals are available...
Well........its about time
I wish I had it earlier
Just read the darn thing and found out the freedom cam goes on the bottom of the bow not the top[:@]
Back to the bow press[:'(]
I wish I had it earlier
Just read the darn thing and found out the freedom cam goes on the bottom of the bow not the top[:@]
Back to the bow press[:'(]
#13
RE: 2004 BowTech Owners Manuals are available...
Iwas just skimming over the new manual and noticed the brace height on the patriot VFT infinity cam is 7 3/4".
Is that true?
I have one on order and thought it was only a 7" b/h.
I will take all I can get, and if it is another 3/4" more than I thought- all the better.
But it "looked" closer to 7" to me.
Is that true?
I have one on order and thought it was only a 7" b/h.
I will take all I can get, and if it is another 3/4" more than I thought- all the better.
But it "looked" closer to 7" to me.
#14
RE: 2004 BowTech Owners Manuals are available...
Oops, looks like I answered my own question. Last page shows 7" like I thought.
Fifth page must be a typo.
Could I please get my Patriot VFT off of the 5th page assembly line?
Fifth page must be a typo.
Could I please get my Patriot VFT off of the 5th page assembly line?