SETUP ISSUES
10-29-2008, 04:01 PM
#1
Thread Starter
Join Date: Oct 2005
Location: NW OHIO
Posts: 221
SETUP ISSUES
I shoota 05 bowtech tribute 65# 30'' draw. ive shot muzzys since i bought this bow (my first) this year i papertuned it for the first time installed a new nap drop away rest , had whisker biscuit before, and i went from 4'' quickspin speed hunters to a 2''quickfletch quickspin speedhunter. my muzzy simply wont fly period , with all these changes it is completely eratic at 15 yards im luck to keep 4-6 shots in a 16-18'' circle. ive went to rage 3 blades -they fly beautifuly? in closing alls well now but i think overall something in my setup is wrong , the muzzys should fly as well as anything i would think ? feedback APPRECIATED
10-29-2008, 05:02 PM
#3
Nontypical Buck
Join Date: Nov 2003
Location: West Chester, Pa.
Posts: 1,892
RE: SETUP ISSUES
If it is that out of wack, I would have to guess major fletching contact. Get some foot powder and spray your vanes before you shoot. You will immediately see if you are hitting the vanes upon release. This is where I would start. Just sounds like the timing is off on the rest.
Shane
Shane
10-29-2008, 05:25 PM
#4
Join Date: Feb 2006
Location: Kodiak, AK
Posts: 2,877
RE: SETUP ISSUES
Binary cams? My binary cam Old Glory won't tolerate a drop away attached to the down cable. (A friend has the EXACT same bow and it is fine with his Ripcord... go figure!) I had to go back to the WB on mine and it's alright with that.
