Community
Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

Broadhead tunning question

Thread Tools
 
Old 01-19-2002 | 11:42 AM
  #1  
ijimmy's Avatar
Thread Starter
Nontypical Buck
 
Joined: Feb 2003
Posts: 2,890
Likes: 0
From: WEST PALM FLORIDA
Default Broadhead tunning question

Hey guys and girls I have a question about broadhead tunning. It seems to me when my bow is tuned corectly and my form is good that when i move my rest slightly feild points might move an inch or so for every 1/16 inch of movement but broad heads will move 2 to 3 inches . have you noticed the same effect .
ijimmy is offline  
Reply
Old 01-19-2002 | 12:17 PM
  #2  
 
Joined: Feb 2003
Posts: 208
Likes: 0
From: Miami FL USA
Default RE: Broadhead tunning question

No, I haven't! But it could because the spine of your broadhead arrows is different from your fieldpoints. This is because by adding a broadhead you have lengthened your arrow and weakened the spine a bit. If your arrowspine is borderline to being with, it will showup when the broadhead is added.
FLHunter is offline  
Reply
Old 01-19-2002 | 03:54 PM
  #3  
 
Joined: Feb 2003
Posts: 315
Likes: 0
From: woodbine KY USA
Default RE: Broadhead tunning question

Ditto...shooting the right arrow spine is more criticall when using broadheads.
Ky_Bowhunter is offline  
Reply
Old 01-19-2002 | 05:41 PM
  #4  
 
Joined: Feb 2003
Posts: 228
Likes: 0
From: Adrian MI USA
Default RE: Broadhead tunning question

I don't see how a longer or shorter point can effect spine. If it was a different weight yes, but the length of the broad head or practice tip should not effect spine. I would think the spine is determined by how hard or easy the shaft bends when force is applied to it. Since the point is a solid piece of metal it does not flex, and should have no effect on the spine of the shaft. That would also lead me to believe that the type of insert and length would also effect the spine of an arrow. If you used an insert that was 2 inches long instead of 1 inch, you would have to calculate your shaft as if it were an inch shorter since that part of the shaft would now be solid.

I am not saying that's the way it is, just the way I understand it. Otherwise it would mean when you buy arrows you would have to already know what broad heads you were going to use to get the correct spine. And field tips would never tune properly or fly right. But the exact oppisite is true, field tips fly better.

I think it has more to do with the fact that the broad heads have blades on them that are like having fletchings on the front of your arrows. They are very sensitive to launch geomitry and wind planing. While field points are very arrow dynamic and quite forgiving to small errors. If your arrows were not spined correctly you would not get them to tune well with broad heads and you would not be able to tell what moving your rest a slight amount did to them because they would be all over the place.

Paul
Biteme/Paul Mohr is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
CTJohnB
Technical
8
08-08-2008 05:12 PM
whitetailbowhunter
Technical
13
01-03-2008 10:29 PM
SRBowman
Bowhunting
7
08-25-2007 09:59 AM
metro
Bowhunting
12
07-10-2005 08:23 PM
cjgjr
Bowhunting
11
01-26-2004 07:20 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.