I bought a hoyt razortech used from a friend and he has since moved away and I have no cantact to him anymore. When I bought the bow it seemed to have the right DL for me but now it seems short. I need to know how to determine the draw length that the bow is set at? Any help appreciated.

Draw the bow and have someone mark the arrow in line with the center of the mounting screw hole. The actual method is to measure to the low part of the grip, but that hole is usually directly over the lowest part of the grip on a Hoyt. Once you've got your mark, measure from the bottom of the notch in the nock to the mark, then add 1 3/4".

Is there no way to tell by looking at the cam? Like by looking at what peg the string is on and what not? Also I would like to know how they work and how to adjust them. i have nevr bought a new bow; when you buy a new bow does it come with instructions for doing this plus maitenance etc. etc.

You've got a Hoyt, so you can get everything you want from their website. http://www.hoyt.com

The info you're after is under the Technical menu. Bow manuals and tune charts. There is all kinds of other good stuff on the Hoyt site you really need to check out.

wow thanks arthur.

I have another qeustion: How do I determine what year my bow is? If it says on the limbs on that white tag I can't read it.

The RazorTec was only made in '03 and '04, and the two models are identical as far as the technical specs.

o ok. Thanks for the help.

I would go to your local archery shop and they could help you out a lot

Not my archery shop, they are a bunch of jerks. Check out my thread "Which Hoyt?"