all are good if thats what your used to .
myself I switched to a drop away just because no contact is better no matter how you look at it .
The mse for instance also contains your arrow ,one more thing you don't have to concentrate on

Guys tend to think the only way to keep your arrow from falling off is to use a whisker biscuit. That's not true. There are full containment drop away rests out there that work great (QAD is a good one). I use a NAP Quick Tune 2000 with a little rubber arrow holder ($5). I can turn my bow upside down and shake it and my arrow won't fall off. When I draw, it's silent and my drop away works as usual. I get full containment plus no fletching contact.

I had a bisquit on for about one year, and after having to re-fletch my arrows on a monthly basis, I got rid of it, and now I have a drop-away and absolutely love it! With a bisquit, you are always going to have vane contact when shooting. With a drop-away, your vanes don't touch anything resulting in longer vane life! Go with the drop-away, you wont regret it.

I used to not trust drop-aways but now love them.
This is my current and best restI have ever owned so far.
The HTM Multiple Positioning drop-away.
It's built like a tank and looks like one too.


Sag.

Nice setup Sag

I have pretty much switched from prong rests to either the Biscuit or drop aways. While it is not really that much of an issue, I get tired of re-covering the prongs with some type of silencing material, which wears out quickly. I know some guys don't use anything on the prongs, and have tried a few rests that were quiet without it, mainly the HHA Techniglide type. That type of rest also holds the arrow pretty well, but for some reason I didn't get the best accuracy out of the rest. Never figured out why, but it wasn't fletch contact.

I have tried the Whisker Biscuit on several bows. I didn't care much for it in the beginning. When I started using an aluminum biscuit with carbon arrows, I started shooting much better. I notice very little difference in accuracy between the biscuit and my drop away. I guess the follow through is a bit more demanding with the biscuit, but the difference in not overly noticeable, and I've yet to see a rest that would allow you get away with a sloppy follow through. I have arrows fletched with Vanetec vanes that I know have been shot through the biscuit a minimum of 500 times, probably closer to 1000. The vanes have slight darkened areas, but otherwise are like new. I have some arrows with feathers on them that have similar # of shots, and the feathers are in good shape too. Not sure why so many are ruining fletching. I also fletch with helical vanes or feathers with no problems at all. Still, I would have to say that I prefer the drop away rest by a little bit. I think it is a little less particular about how perfect my grip happens to be, and maybe the follow through is not quite as critical. As I said, it doesn't seem to be an earth-shattering difference, but I do like the drop away a little, especially for 3D or target practice. More to go wrong when hunting? Yes, again there is a little more risk, but you also have a more wide open choice of arrows, where with the biscuit, I find myself avoiding arrows with a rough finish, like the Carbon Tech Cheetahs that I really like. Nothing wrong with a good shoot through rest, but the Biscuit and drop aways do have some advantages.

Drop aways are the most accurate because your arrow is leaving the bow in the purest form without your fletchings coming in contact. Drop aways are the best IMO. I shoot a Trophy taker.

I have shot quite a few different rests and none are really more accurate than the other if set up correctly. Drop a ways are not more forgiving than a good prong rest, or better yet a blade rest. They do help if you have fletching contact issues though. In my opinion that is their only benifit. Some drop a ways because of the way they function actually work as a slight overdraw rest, which is not more forgiving at all. And almost every drop a way I have used required a slightly higher nock setting in order to get the same tune I had with a prong rest.

I currently use a drop a way but am considering going back to a prong rest or a blade type rest. Nothing really wrong with it, just some minor issues I am having with it that bug me more than effect function.

Some of the best groups I have ever shot were with a 20 dollar prong rest, cheap 3 pin sights and the release hooked right to the string. Sometimes simple is better.

Paul