sighting in problems
#1
Thread Starter
Join Date: Feb 2003
Location: Plano TX USA
Posts: 66
sighting in problems
i just changed my pin setup from 20-30-40 to 10-20-30, and all i did to do this was move my 40 up. im dead on at 10, but all of a sudden i cant hit anything at 20. i never touched it. its just that im not getting anything consistant. theyre goin everywhere. i dunno whats wrong. is it just cuz im not used to using the middle pin at that distance or what?
#3
Thread Starter
Join Date: Feb 2003
Location: Plano TX USA
Posts: 66
RE: sighting in problems
no, im not changing my anchor point, i made sure. usually i would make it so that i saw the entire sight through my peep, and that hasnt changed. i just dont feel steady now i think, after i changed my pin. the arrows arent grouping at all.
#4
Join Date: Feb 2003
Location: Washington State
Posts: 382
RE: sighting in problems
I would double check your bow to make sure nothing else got 'bumped' or moved when you were changing your sight pin. Hate to say it, but it sounds like a shooter problem and not a bow problem. Good luck and be patient.