Help to find where it is possible to read about process reloading
02-21-2006 | 11:13 AM
#1
Thread Starter
Fork Horn
Joined: Feb 2005
Posts: 283
Likes: 0
From: Russia, Moscow
Help to find where it is possible to read about process reloading
Interests process of selection ofbrass andbullets.
Qualitative preparation of brass.
Admissions and palpation at installation of bullets.
The order of preparation of a neck of a brass.
Characteristics influencing accuracy of shooting.
Please give the reference in internet.
To me has carried to win the All-Russia tournament onvarminting.The last year. I managed to achieve stably 0.3 MOA, using a usual manual on reloading. This year it is not so enough.
It is a photo from the last tournament. I am from the left side the first.
Qualitative preparation of brass.
Admissions and palpation at installation of bullets.
The order of preparation of a neck of a brass.
Characteristics influencing accuracy of shooting.
Please give the reference in internet.
To me has carried to win the All-Russia tournament onvarminting.The last year. I managed to achieve stably 0.3 MOA, using a usual manual on reloading. This year it is not so enough.
It is a photo from the last tournament. I am from the left side the first.
02-21-2006 | 11:28 AM
#2
Guest
Posts: n/a
RE: Help to find where it is possible to read about process reloading
Some people like this book. I don't have it myself.
http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=665601
http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=665601
02-21-2006 | 01:51 PM
#3
Nontypical Buck
Joined: Feb 2003
Posts: 1,032
Likes: 0
From: Olive Branch MS USA
RE: Help to find where it is possible to read about process reloading
02-21-2006 | 08:05 PM
#4
Joined: Feb 2006
Posts: 493
Likes: 0
RE: Help to find where it is possible to read about process reloading
modern reloading second edition by Richard Lee, has some good advice. Although you may be shooting at a higher level than this book can improve upon, It's still a lot of information for a little money. Available from www.midwayusa.com Around $11.00 us.
03-03-2006 | 07:38 AM
#6
Nontypical Buck
Joined: Jun 2004
Posts: 4,572
Likes: 0
From: MD
RE: Help to find where it is possible to read about process reloading
ORIGINAL: Sasha_from_RF
Admissions and palpation at installation of bullets.
Admissions and palpation at installation of bullets.
03-05-2006 | 07:31 AM
#8
Fork Horn
Joined: Feb 2004
Posts: 279
Likes: 0
From:
RE: Help to find where it is possible to read about process reloading
I think we know more than we're giving ourselves credit for.
We each have our own little variation on the basic principles of decap, resize, prepare, prime, charge, load & seat...
Look at the threads we've posted over the last year, or even six months... some of us prefer nickel plated brass, some of us don't.
We use specific powders for specific calibers and loads. Why?
What was that one I got my chops busted over... oh yeah.. the one molecule thick moly coating stuff... I still don't see the sense in expending the effort for that, but someone swore up and down it decreased friction and extended barrel life..
what is it we do, and why do we do it?
Full-length resizing vs neck sizing
inside vs outside neck turning
trimming, deburring and uniforming primer pockets and flash holes...
selection of brass (brand)
primers
good grief... should we write our own book?
We each have our own little variation on the basic principles of decap, resize, prepare, prime, charge, load & seat...
Look at the threads we've posted over the last year, or even six months... some of us prefer nickel plated brass, some of us don't.
We use specific powders for specific calibers and loads. Why?
What was that one I got my chops busted over... oh yeah.. the one molecule thick moly coating stuff... I still don't see the sense in expending the effort for that, but someone swore up and down it decreased friction and extended barrel life..
what is it we do, and why do we do it?
Full-length resizing vs neck sizing
inside vs outside neck turning
trimming, deburring and uniforming primer pockets and flash holes...
selection of brass (brand)
primers
good grief... should we write our own book?
Thread
Thread Starter
Forum
Replies
Last Post
idahoelkinstructor
Reloading
33
05-22-2006 10:35 AM
Michael Iaconelli and Jimmy Kimmel what do they have in common? Read this post and you will find out
huntingbuddy419
Freshwater Fishing
4
05-20-2006 10:32 AM
