Barrel Interchangibility on NEF Handi Rifle
01-22-2005 | 02:08 PM
#11
Nontypical Buck
Joined: Feb 2003
Posts: 2,271
Likes: 0
From: Crescent Valley, NV
RE: Barrel Interchangibility on NEF Handi Rifle
http://www.hr1871.com/barrelAcc/index.htm
Check the last item under the Barrel Accessory Program heading.
Check the last item under the Barrel Accessory Program heading.
In order to obtain an additional barrel(s), the stock, forend and frame (receiver) must be sent to us so they may be properly hand-fitted to the barrel, to be sure they are correctly head-spaced and proof-tested.
01-22-2005 | 04:00 PM
#12
Boone & Crockett
Joined: Feb 2003
Posts: 10,679
Likes: 0
RE: Barrel Interchangibility on NEF Handi Rifle
Hand fitting sure cause I'm sure they need to hand fit the pin to the block and make sure it locks up properly.
Throwing in headspacing, I'm sure, is just there way of adding a little bit of "fear" to the average consumer that wouldn't know what headspace meant if you read them the definition. You can headspace any break open firearm with out the frame.
Throwing in headspacing, I'm sure, is just there way of adding a little bit of "fear" to the average consumer that wouldn't know what headspace meant if you read them the definition. You can headspace any break open firearm with out the frame.
