What do u recomend for whitetails. Im shooting a pse spyder at about 60 pound draw weight.

I love my Muzzy 4 blades.

Wasp 3 blades

I think the only reason that I would go back to a 2 blade broadhead on my compound would be if I was concerned about penetration. So if that is the case I would suggest a two balded head. If that isn't the case, I would recommend 3 blades.

Which is it, 55 or 60?

Either way you should be fine with a 2, 3, or 4 blade broadhead of 1 - 1 1/8 cutting diameter hunting whitetails. I would not recomend mechanicals as they loose energy deploying the blades and most have very large cutting diameters which will reduce penetration.

Two-bladed broadheads tend to wind plane slightly more than 3 or 4-bladed heads. 2-bladed heads also tend to not leave as good of a blood trail as the 3 or 4-bladed heads. Stick with Muzzy or Thunderheads or similar type heads and you wont go wrong.

I would use a 3 bladed broadhead like muzzy's , their a little harder to tune than most but they might be worth it. A 4 bladed steelforce hellfire or and broadhead the make they are the sharpest in the world. Good hunting

Muzzzzzzy 90 grain 4-blade tip. It's lite but I get unbelieveable penetration.

crimson talon 90 grain here

Ether one will work! two or three blade, Just make sure there on stright. And are sharp! i think it just depends on you? Just put it where it needs to be! And you will not have any problem