HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Bowhunting (https://www.huntingnet.com/forum/bowhunting-18/)
-   -   3 blade or 2 blade (https://www.huntingnet.com/forum/bowhunting/64687-3-blade-2-blade.html)

SmithHunt1 06-28-2004 11:28 AM

3 blade or 2 blade
 
What do u recomend for whitetails. Im shooting a pse spyder at about 60 pound draw weight.

farmcntry 06-28-2004 11:50 AM

RE: 3 blade or 2 blade
 
I love my Muzzy 4 blades.

Buckslayer1 06-28-2004 11:57 AM

RE: 3 blade or 2 blade
 
Wasp 3 blades

BobCo19-65 06-28-2004 12:01 PM

RE: 3 blade or 2 blade
 
I think the only reason that I would go back to a 2 blade broadhead on my compound would be if I was concerned about penetration. So if that is the case I would suggest a two balded head. If that isn't the case, I would recommend 3 blades.

bigbulls 06-28-2004 12:31 PM

RE: 3 blade or 2 blade
 

actually im 16 and pulling 55-shows how much u think u know
Which is it, 55 or 60?;)

Either way you should be fine with a 2, 3, or 4 blade broadhead of 1 - 1 1/8 cutting diameter hunting whitetails. I would not recomend mechanicals as they loose energy deploying the blades and most have very large cutting diameters which will reduce penetration.

ARDeerSlayer 06-28-2004 12:46 PM

RE: 3 blade or 2 blade
 
Two-bladed broadheads tend to wind plane slightly more than 3 or 4-bladed heads. 2-bladed heads also tend to not leave as good of a blood trail as the 3 or 4-bladed heads. Stick with Muzzy or Thunderheads or similar type heads and you wont go wrong.

lou-lou 06-28-2004 01:06 PM

RE: 3 blade or 2 blade
 
I would use a 3 bladed broadhead like muzzy's , their a little harder to tune than most but they might be worth it. A 4 bladed steelforce hellfire or and broadhead the make they are the sharpest in the world. Good hunting

Bowdaddy 06-28-2004 02:04 PM

RE: 3 blade or 2 blade
 
Muzzzzzzy 90 grain 4-blade tip. It's lite but I get unbelieveable penetration.

madbowhunter 06-28-2004 02:07 PM

RE: 3 blade or 2 blade
 
crimson talon 90 grain here

RTA47 06-28-2004 02:40 PM

RE: 3 blade or 2 blade
 
Ether one will work! two or three blade, Just make sure there on stright. And are sharp! i think it just depends on you? Just put it where it needs to be! And you will not have any problem ;)


All times are GMT -8. The time now is 11:48 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.