Jason, pull the bow back and have someone mark the cable rod at the back of the slide. Now you can set the cord length by just pulling the slide back. Set it so the rest is fully up at this point. If the cord is too short it'll drop too late, and bind the cables. Also, look at how the cord is attached to the rest in the pic. This makes a big difference. I have a Shakey hunter on my Liberty, and an original on my P40 Dually.

Here's a better view of the rest/cord attachment.

The rest will drop plenty fast - thats not the problem.

You need more support noT less - you need the rest to come up sooner

It has everthing to do with nock travel not the speed of the rest.

I know Bowtech is known for listening to its customers so I hope they read this

WORK ON YOUR NOCK TRAVEL ISSUES

There are 2 spring settings on the trophy taker , when you get it stock its set on the low or slow setting . To change it to the high or fast setting you have to undo the locknut and put the spring in the hole that is clockwise on the rest . You may be abel to fix the problem by lengthening you cabel slightly .