To kiss or not to kiss, that is the ?
#21
Fork Horn
Joined: Oct 2007
Posts: 225
Likes: 0
From: Southeastern Michigan
I useda kisserfor awhile - years ago when I first started shooting - but I prefer to use the nock in the corner of my mouth. Same resultas the kisser with no loss of speed.
#22
Im with you on this one. I do the same thing. That way we have more excuses for a bad shot
. Actually havent made a bad shot in years since i went to both.
. Actually havent made a bad shot in years since i went to both.
ORIGINAL: deerslayer223
I use one along with a peep. It just helps give me the piece of mind of having a solid anchor everytime.
I use one along with a peep. It just helps give me the piece of mind of having a solid anchor everytime.
#25
ORIGINAL: nissan300ztt
[blockquote]quote:
ORIGINAL: nissan300ztt
it...slows the bow down 9fps along with other accessories
[/blockquote]
Really??? Not that I don't believe you. Just surprised.
Well on my bowtech commander jacked to 71# my bow with the stock brass knock and the rubber button to show the factory knock point brings the bow down to 303FPS and with a kisser it averages 293fps which sucks....so i removed it and took off the factory string silencers and put cat whiskers on cables and string seem to be getting 305FPS...so i dont know if its based on the bow and let off but i know i lost speed with my kisser.
[blockquote]quote:
ORIGINAL: nissan300ztt
it...slows the bow down 9fps along with other accessories
[/blockquote]
Really??? Not that I don't believe you. Just surprised.
Oh and for me, obviously I use the rubber stock button for a kisser, center the string in my nose, and barely touch my top vane with my lip. That is when the universe is in line for me on my 101.
#26
No kisser.
I also anchor with the nock / loop / release at the corner of my mouth, tip of nose touches string.
High anchor causes front sight to have to be set lower, but I still have a 60 yard pin.
Sight housing is in alignment with peep at full draw.
I also anchor with the nock / loop / release at the corner of my mouth, tip of nose touches string.
High anchor causes front sight to have to be set lower, but I still have a 60 yard pin.
Sight housing is in alignment with peep at full draw.




