Best 3D Rest???
#72
ORIGINAL: Rob/PA Bowyer

Springy rest originally manufactured by Pat Norris
Bonnie Bowman Archery (1970's)

Springy rest originally manufactured by Pat Norris
Bonnie Bowman Archery (1970's)
This also came in a micro adjust, real expensive about 12. bucks. Not so hard to tune, I cant tell you how many of them I set up by just eyeballingit, and get a bullet hole first shot.
Its a 60X rest,it just needs a 60X shooter using it
.
#73
RJ
NOT,trying to start an argument but I do know of someone that has tested the zero effect on a shooting machine to see how it performed with creep tuning and it didn't do very well.This is a very experienced person that does this type of stuff for world competitors so I trust him.Very experienced.
I personally have never set one up.So Iam only going off what he has told me.
NOW,that probably has little bearing on what most 3-d shooters are using nowadays,if you creep with many bows now,you will get your arm ripped off so that probably isn't a problem but if you have a longer limbed bow that has some flex or a two cam bow,it might make a difference.
NOT,trying to start an argument but I do know of someone that has tested the zero effect on a shooting machine to see how it performed with creep tuning and it didn't do very well.This is a very experienced person that does this type of stuff for world competitors so I trust him.Very experienced.
I personally have never set one up.So Iam only going off what he has told me.
NOW,that probably has little bearing on what most 3-d shooters are using nowadays,if you creep with many bows now,you will get your arm ripped off so that probably isn't a problem but if you have a longer limbed bow that has some flex or a two cam bow,it might make a difference.
Thread
Thread Starter
Forum
Replies
Last Post
bobcat 10
Bowhunting Gear Review
2
09-05-2003 07:56 PM





