Dead Nuts Sight...broke a pin
03-21-2005, 08:14 AM
#1
Thread Starter
Join Date: Jan 2004
Location: Eureka, MO
Posts: 3,703
Dead Nuts Sight...broke a pin
Anyone else have problems with the dead nuts hunter pins breaking? I shot a 3-D shoot yesterday and I got up to the next target and my middle pin was just dangling. Now with the zero pin gap pins, I gotta buy a whole new set of pins.[:@]
Anyone use the Protective cover for the pins made by copper john?
Anyone use the Protective cover for the pins made by copper john?
03-21-2005, 08:52 AM
#2
Giant Nontypical
Join Date: Aug 2003
Location: The OH-IO
Posts: 7,103
RE: Dead Nuts Sight...broke a pin
I have broke 2 pins over the past two years.
I broke them both while hunting though not during 3-D. I bought the C.U.P. to protect them. Haven't broke any since then.
I broke them both while hunting though not during 3-D. I bought the C.U.P. to protect them. Haven't broke any since then.
03-21-2005, 01:30 PM
#4
Fork Horn
Join Date: Dec 2004
Location: Ottawa Co, Mi.
Posts: 162
RE: Dead Nuts Sight...broke a pin
any brand fiber optic pin like the ones Copper John uses are easily broken... It's just a fact you have to be carefull with them... I have broke 2 in 3 years and 1 of the time it was due to a dropped bow from my treestand... (ouch) I now have the Deadnutz sight with the CUP on it... No problems...
03-21-2005, 06:15 PM
#7
Nontypical Buck
Join Date: Feb 2003
Location: Kerrville, Tx. USA
Posts: 2,722
RE: Dead Nuts Sight...broke a pin
I just recently got a Dead Nuts sight. Since I will only be hunting, I got the 0.29 pins. I hear they are less likely to break. I understand that 3=D shooters usually get the smaller pins, which are more likely to break, but of course are smaller, so better for fine detail aiming. I will probably get the CUP before I take it into the field.
03-22-2005, 05:14 PM
#8
Join Date: May 2003
Posts: 138
RE: Dead Nuts Sight...broke a pin
mo bowhuntr. i had 3 pins break on me. 2 happened when i was hunting,and then 1 broke when i was just practicing. i emailed them and told them that i did not know if it was me or a bad batch of pins. to make a long story short. they emailed me back saying the replacement pins were in the mail.no fuss or anything. their costumer service i thought ,was hard to beat.
