chrissea14

My friend recently just bought a Mathews Drenalin.At first the bow was qiuet as could be.Over time he noticed that the bow developed a loud twanging noise when shot.What could be causing this noise?Any opinions?

MOhunter46

A buddy of mine has a drenalin and it used to be loud. His bow is supposed to be 60 to 70lbs and his bow was set on 55 lbs. They cranked it up to 60lbs and now it is very quiet. So maybe that has something to do with it.

ranger56528

Make sure nothing is loose.....

blackfish

No, I,m the freind. and the bow is 60 to 70and @67everythings tight I was thinking the string I don t know thanks for the help guys

nvshooter

Check your limbs for cracks, and your cam. Look your string over for cuts and fraying.

Sooner State Hunter

go over to the mathews site, they could probably help you out.

MeanV2

A lot of bow noise can be traced to accessories. Check for loose/rattling e-clips, all fasteners on the bow should be checked. Sometimes you can chase a sound down by thumping the bow with the heel of your hand and listening for it. If all else fails start taking of the accessories.

It may take some time but you can find it

Dan

blackfish

I have tried everything talked about including adding and subtracting twist to the sring and cable even though brce and ata where fine I havnt gone to the orig, 62 lbs.didnt think I should have to it is not terrible but it is kind of disapointing seeing it was so noise free before thanks david