Omega advice needed ....... scope question..
#1
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 6
Likes: 0
I recently purchased a .50 cal Omega ... laminate stock. I put the T/C encore/omega mount on it and purchased a Leupold 3x9x40mm matte scope ..... I wanted to have the option of still using the fixed sites so the gunsmith I got this from used the new Leupold High quick-release rings .... problem is ...... the scope doesnt clear the rear site .... and the eye releif isnt quite where I would like it ... the scope should be forward atleast an inch ....... he gave me the pitch initially of " oh well ... you' ll be wearing heavy clothes when you use it etc etc ...." ..... welll .... I' m back from my first range test and I have a nice cut on my forehead to show for it ....... does anyome know of a hi-quality ' super-high' ring-set I can use that is quick-release .... I dont thing Leupold makes one ...... Thanks in advance guys ..... bringing this out to pike-county first week of december .....
#2
Nontypical Buck
Joined: Feb 2003
Posts: 3,092
Likes: 0
Leupold does make super high QRs -
At Brownell' s 526-517-150 1" Super High Matte Blue $35.20
http://www.brownells.com/aspx/NS/sto...QUICK-RELEASE? MOUNT SYSTEM
but I don' t know if that will solve your problem of scope-eye. Might make it worse unless that height also allows you to move the scope forward.
Hope they work for you.
At Brownell' s 526-517-150 1" Super High Matte Blue $35.20
http://www.brownells.com/aspx/NS/sto...QUICK-RELEASE? MOUNT SYSTEM
but I don' t know if that will solve your problem of scope-eye. Might make it worse unless that height also allows you to move the scope forward.
Hope they work for you.
#3
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 6
Likes: 0
Underclocked .... thanks very much for the response ..... in looking at Brownells ..... this is the Leupold setup I have: http://www.brownells.com/aspx/NS/sto...26+BASE+SYSTEM
This is the cross-slot mounted QRW ring-set ...... I should have been more specific in my initial description ....... if I could find some rings that would fit this type of base that are ' super-high' ..... just another 1/8th on an inch additional height would allow me to move the scope forward and avoid these headaches .... literally ....
This is the cross-slot mounted QRW ring-set ...... I should have been more specific in my initial description ....... if I could find some rings that would fit this type of base that are ' super-high' ..... just another 1/8th on an inch additional height would allow me to move the scope forward and avoid these headaches .... literally ....
#4
Nontypical Buck
Joined: Jul 2003
Posts: 2,922
Likes: 0
I had the same problem -- same cut! I went to high see-thru rings, a shorter/more eye relief (5" ) Simmons Pro Hunter 4X scope & removed the original recoil pad & replaced it with a 1-1/4" thick Sims pad.
No more blood plus the Omega' s short stock felt better to shoulder & find my sights after replacing that thin recoil pad with a fatter one.
No more blood plus the Omega' s short stock felt better to shoulder & find my sights after replacing that thin recoil pad with a fatter one.
#5
Nontypical Buck
Joined: Feb 2003
Posts: 3,092
Likes: 0
They have the Weaver Grand Slams in extra high (also the price is extra high).
http://www.brownells.com/aspx/NS/Sto...AND+SLAM+RINGS
You might look elsewhere for a better price. Allabouthunting has them in the 40s but they are out of the extra high.
http://www.brownells.com/aspx/NS/Sto...AND+SLAM+RINGS
You might look elsewhere for a better price. Allabouthunting has them in the 40s but they are out of the extra high.




