T/C Bone Collector Update
03-28-2009 | 06:42 AM
#21
Nontypical Buck
Joined: Oct 2008
Posts: 3,869
Likes: 0
From: Camp Lejeune, NC
RE: T/C Bone Collector Update
ORIGINAL: Grouse45
I think this is why me and you clash. You agree and disagree with stuff you dont even know. You have never owned a Triumph before. I have owned 4 Triumphs, Two Encores, andone Pro-Hunter. I make comments on stuff right or wrong because i have owned them and used them. The Endeavor is a copy of the Triumph. The Bone Collector is a copy of the Endeavor.
ORIGINAL: SWThomas
I'm gonna have to agree with you. I just can't see a gun company, who's in the business of selling guns, openly telling people that a less expensive gun is better than a more expensive one... Sounds like a pretty stupid marketing strategy to me. IMO, the Encore is far superior to the Triumph.
I'm gonna have to agree with you. I just can't see a gun company, who's in the business of selling guns, openly telling people that a less expensive gun is better than a more expensive one... Sounds like a pretty stupid marketing strategy to me. IMO, the Encore is far superior to the Triumph.
03-28-2009 | 06:52 AM
#22
Nontypical Buck
Joined: Oct 2008
Posts: 3,869
Likes: 0
From: Camp Lejeune, NC
RE: T/C Bone Collector Update
ORIGINAL: Grouse45
Not really, the Triumph is designed alot better then the Encore. The hinge pin on the Encore is way to inconsistent. The lock up on the Triumph is really good and wont change. The encore will change POI just by sliding the hinge pin. PRbullet and many companies made a fortune correcting that design. Trigger springs to. The Encores have had horrible triggers out of the box. All mine went to the gun shop to get spring put in. The handy guys did it themselves. The Triumph trigger is under four lbs from the factory guaranteed. One of my Encores was 7.5lbs out of the box. That's bad and that was a few years ago.
Any current Encore owners you should tape your hinge pin for more consistent performance. Sounds crazy, but it works. Both sides that is.
ORIGINAL: sabotloader
Not really they really are the pretty much the same gun unless you want to change barrels to centerfire... other than that when you compare ML to ML they are next to the same
Not really they really are the pretty much the same gun unless you want to change barrels to centerfire... other than that when you compare ML to ML they are next to the same
Any current Encore owners you should tape your hinge pin for more consistent performance. Sounds crazy, but it works. Both sides that is.
And another thing. Why would TC commission you to conduct tests with their products and BH209 when they have plenty of professional people to do it. Why would they waste their time and money having an amateurwith nocredentials do this??? Just curious because I think you pump yourself up a lot and make yourself sound a lot more important than you really are.
03-28-2009 | 10:12 AM
#23
Banned
Joined: Dec 2008
Posts: 9,186
Likes: 0
From: Boncarbo,Colorado
RE: T/C Bone Collector Update
because grouse will tell you straight up if something sucks or not.
Hes not a TC baffoon that you can hand a check to and have your "member" serviced by that one tester and talk up a product.
Hes not a TC baffoon that you can hand a check to and have your "member" serviced by that one tester and talk up a product.
03-28-2009 | 12:47 PM
#24
Thread Starter
Nontypical Buck
Joined: Mar 2009
Posts: 3,926
Likes: 0
From: Saxonburg Pa
RE: T/C Bone Collector Update
ORIGINAL: MountainDevil54
because grouse will tell you straight up if something sucks or not.
Hes not a TC baffoon that you can hand a check to and have your "member" serviced by that one tester and talk up a product.
because grouse will tell you straight up if something sucks or not.
Hes not a TC baffoon that you can hand a check to and have your "member" serviced by that one tester and talk up a product.
The Triumph is the best factory ML for BH209 right now in my opinion.
03-28-2009 | 02:06 PM
#28
Fork Horn
Joined: Mar 2009
Posts: 254
Likes: 0
From: MN
RE: T/C Bone Collector Update
ORIGINAL: Grouse
ThankYou, that's very true. I could of had a Bone Collector from them and turned it down. I really wanted the new Knight and have had no luck. I will say the Knight Vision has been awesome with the new plug.
The Triumph is the best factory ML for BH209 right now in my opinion.
ThankYou, that's very true. I could of had a Bone Collector from them and turned it down. I really wanted the new Knight and have had no luck. I will say the Knight Vision has been awesome with the new plug.
The Triumph is the best factory ML for BH209 right now in my opinion.
#2 For a nobody,you're really arrogant.
03-28-2009 | 02:23 PM
#29
Nontypical Buck
Joined: Oct 2008
Posts: 3,869
Likes: 0
From: Camp Lejeune, NC
RE: T/C Bone Collector Update
ORIGINAL: MountainDevil54
because grouse will tell you straight up if something sucks or not.
Hes not a TC baffoon that you can hand a check to and have your "member" serviced by that one tester and talk up a product.
because grouse will tell you straight up if something sucks or not.
Hes not a TC baffoon that you can hand a check to and have your "member" serviced by that one tester and talk up a product.
03-28-2009 | 05:10 PM
#30
Boone & Crockett
Joined: Apr 2007
Posts: 10,918
Likes: 1
From: River Ridge, LA (Suburb of New Orleans)
RE: T/C Bone Collector Update
You know guys, up until a month or two ago we very very seldom encountered disagreeable attitudes or personal attackson this site. It sure was nice. Now stop it.