Traditions Accelerator Speed Breech
07-17-2008 | 12:35 PM
#1
Thread Starter
Nontypical Buck
Joined: Oct 2003
Posts: 3,313
Likes: 0
From: Lake County, Florida
Traditions Accelerator Speed Breech
anyone know if this breech plug is interchangable with the Pursuit Pro? it would be nice to have a breech plug that i don't need a wrench for. this breech plug comes standard on the newer Traditions Pursuit II XLT
07-18-2008 | 04:26 PM
#2
Fork Horn
Joined: Jan 2006
Posts: 252
Likes: 0
From: Hyde Park, Utah
RE: Traditions Accelerator Speed Breech
Nope !!
The barrel isnot the same and you can see the speed breach plug on the end of the barrel when closed .
I don't care for the speed breach plugs . It on takes a minute to remove the old style . Plus your gun looks better. Plus when i use Teflon tape on the threads , it comes out spotless and the tape in the front seals the plug . I had a Tradition Pursuit pro , very nice gun and it was a nail driver .
You will see in the adress below that the Speed breach is exsposed when the gun is closed , where the other breach plugs are flush with the end of the barrel .
http://www.traditionsfirearms.com/
The barrel isnot the same and you can see the speed breach plug on the end of the barrel when closed .
I don't care for the speed breach plugs . It on takes a minute to remove the old style . Plus your gun looks better. Plus when i use Teflon tape on the threads , it comes out spotless and the tape in the front seals the plug . I had a Tradition Pursuit pro , very nice gun and it was a nail driver .
You will see in the adress below that the Speed breach is exsposed when the gun is closed , where the other breach plugs are flush with the end of the barrel .
http://www.traditionsfirearms.com/
