Allegiance vane clearance

Buckfeveragain1969 · 03-06-2007, 08:48 AM

I have a 06 Allegiance and am using Blazers,I was wondering if anyone had clearance issues with these vanes.Thanks

YooperMike · 03-06-2007, 09:13 AM

On my OG, the blazers needed to be shot with cock vane shot slighty turned in toward the cable (if shooting cock-up). With the cables being so close to the string, there isn't a whole lot of room for a high profile vane, but by tipping it slightly, they worked fine.

mez · 03-06-2007, 10:29 AM

I had the same issue Mike did, and fixed it the same way. I also replaced the cable slide with a Sims teflon. It is lower profile than the stock slide and that also helped.

archer58 · 03-06-2007, 08:17 PM

It must be a Bowtech thing. My Black Ice hastight clearence also. I have to turn the vanes some to get by the cables. I'm giong to get a different slide.

DougE · 03-07-2007, 09:21 AM

I was having clearance issues with my tribute soI replaced the blazers with flex fletch vanes and all is good.

walks with a gimp · 03-07-2007, 10:39 AM

I don't think you'd loose much "stearage" if you cut the Blazers down 1/8 of an inch

passthru79 · 03-07-2007, 04:28 PM

I had an 05 allegiance, same problems with clearance. I was shooting quick spin 2 inch speed hunters, they have the same outline as a blazer. Just a slight turn in took care of it or switch to a slightly lower profile vane.