I have a 06 Allegiance and am using Blazers,I was wondering if anyone had clearance issues with these vanes.Thanks

On my OG, the blazers needed to be shot with cock vane shot slighty turned in toward the cable (if shooting cock-up). With the cables being so close to the string, there isn't a whole lot of room for a high profile vane, but by tipping it slightly, they worked fine.

I had the same issue Mike did, and fixed it the same way. I also replaced the cable slide with a Sims teflon. It is lower profile than the stock slide and that also helped.

It must be a Bowtech thing. My Black Ice hastight clearence also. I have to turn the vanes some to get by the cables. I'm giong to get a different slide.

I was having clearance issues with my tribute soI replaced the blazers with flex fletch vanes and all is good.

I don't think you'd loose much "stearage" if you cut the Blazers down 1/8 of an inch

I had an 05 allegiance, same problems with clearance. I was shooting quick spin 2 inch speed hunters, they have the same outline as a blazer. Just a slight turn in took care of it or switch to a slightly lower profile vane.