making a paddle call
03-31-2003, 10:49 PM
#1
Thread Starter
Join Date: Mar 2003
Location: Auburn WA.
Posts: 1,396
making a paddle call
I' m thinking of buliding my own paddle call and possibly wanting to cut it out of a solid piece for the base. Does any one have either any good advice or point me toward some literature to try this out. Be real rewarding putting a tom in the pto using something you made yourself. thanx
04-01-2003, 12:29 AM
#3
Join Date: Feb 2003
Location: Salem VA Salem, VA
Posts: 753
RE: making a paddle call
I havn' t tried the box calls yet but here is a pretty informative page....
http://www.geocities.com/theboxcallpage/
Also http://www.customsawing.com sales " Neil Cost" poplar blanks for long boxes. They also carry pre-molded paddles in a good many woods and also have hardware for box calls.
Neil Cost had a book on the subject but you might be hard pressed to find one and if you do it' s going to be $$$$$, I think it was called Talking Turkey
http://www.geocities.com/theboxcallpage/
Also http://www.customsawing.com sales " Neil Cost" poplar blanks for long boxes. They also carry pre-molded paddles in a good many woods and also have hardware for box calls.
Neil Cost had a book on the subject but you might be hard pressed to find one and if you do it' s going to be $$$$$, I think it was called Talking Turkey
04-01-2003, 04:38 AM
#4
Join Date: Feb 2003
Location: park falls wi
Posts: 615
RE: making a paddle call
Here are two sites that have message boards on callmaking.You should be able to get some info.
http://www.customcalls.com/
http://www.calltrader.com/
http://www.customcalls.com/
http://www.calltrader.com/
