Empty Photos
#1
Thread Starter
Join Date: Oct 2006
Posts: 6
Empty Photos
I just purchased a Cabelas 4.1 Outfitter Cam by Moultrie. So far I'm getting dozens of pictures of the feeder without any wildlife in view. I read that this can be caused by the heat...it's been in the 90's just about every day.
Is there a trick to get it to only trigger when it should?
By the way, it has taken a few good pictures...
Is there a trick to get it to only trigger when it should?
By the way, it has taken a few good pictures...
#6
Join Date: Oct 2005
Location: Graham Texas
Posts: 193
RE: Empty Photos
Thats the deal I had with my first cam (moultrie)
Try this set the cam up and about 10-15 ft in front of it walk by starting out fast and geting slower each pass.
I dont think you will be very pleased with the trigger speed= Time camera wakes up and snaps a picture.
See the picture if this deer was 4 ft closer it would take a super fast trigger time to catch him as he's hauling but. this cam has around 1-1.2 second trigger.
Try this set the cam up and about 10-15 ft in front of it walk by starting out fast and geting slower each pass.
I dont think you will be very pleased with the trigger speed= Time camera wakes up and snaps a picture.
See the picture if this deer was 4 ft closer it would take a super fast trigger time to catch him as he's hauling but. this cam has around 1-1.2 second trigger.