recurve/longbow hard case?
02-04-2005 | 11:18 AM
#1
Thread Starter
Joined: Nov 2004
Posts: 296
Likes: 0
From: South Bend IN
recurve/longbow hard case?
Anybody know where I can find a hardcase for a recurve (60")? Also need the same for a longbow(68"). A duelie/double case would be great. I have checked Ebay, but they are few and far between. Thanks!
02-04-2005 | 04:52 PM
#2
Fork Horn
Joined: Nov 2003
Posts: 140
Likes: 0
From: Quebec/canada
RE: recurve/longbow hard case?
Make one with an ABS pipe 4" or 6" ,split it lenght way cover the interior with a felt covering glued in,then glue the two part of ABS pipe togetter ,glue a cap at one end ,cover your tube with cloth ,make a cap with hinge and locking tab.
Taureau noir
Taureau noir
02-04-2005 | 08:03 PM
#3
Dominant Buck
Joined: May 2003
Posts: 22,545
Likes: 0
From: Ramsey , Indiana
RE: recurve/longbow hard case?
ORIGINAL: Taureaunoir
Make one with an ABS pipe 4" or 6" ,split it lenght way cover the interior with a felt covering glued in,then glue the two part of ABS pipe togetter ,glue a cap at one end ,cover your tube with cloth ,make a cap with hinge and locking tab.
Taureau noir
Make one with an ABS pipe 4" or 6" ,split it lenght way cover the interior with a felt covering glued in,then glue the two part of ABS pipe togetter ,glue a cap at one end ,cover your tube with cloth ,make a cap with hinge and locking tab.
Taureau noir
You could give it a coating of Fleckstone so that it looked like stone , or some snakeskin for ultimate cool factor . The possibilities are endless . Leave it to a Quebequer to find the simple answer ...
02-05-2005 | 05:05 AM
#4
Fork Horn
Joined: Nov 2003
Posts: 140
Likes: 0
From: Quebec/canada
RE: recurve/longbow hard case?
It is not realy my idea.
Iread that on an American bowhunting site where someone was looking for a way to send a longbow without damage in transport.
Give credit to American guys for these idea The split in two and felt covering is my idea.
Taureau noir
Iread that on an American bowhunting site where someone was looking for a way to send a longbow without damage in transport.
Give credit to American guys for these idea The split in two and felt covering is my idea.
Taureau noir
02-05-2005 | 09:47 AM
#6
Nontypical Buck
Joined: Feb 2003
Posts: 2,120
Likes: 0
From: Spring Grove, Pa. USA
02-05-2005 | 01:14 PM
#7
Dominant Buck
Joined: May 2003
Posts: 22,545
Likes: 0
From: Ramsey , Indiana
RE: recurve/longbow hard case?
ORIGINAL: Taureaunoir
It is not realy my idea.
Iread that on an American bowhunting site where someone was looking for a way to send a longbow without damage in transport.
Give credit to American guys for these idea The split in two and felt covering is my idea.
Taureau noir
It is not realy my idea.
Iread that on an American bowhunting site where someone was looking for a way to send a longbow without damage in transport.
Give credit to American guys for these idea The split in two and felt covering is my idea.
Taureau noir
Thanks !
02-05-2005 | 05:23 PM
#8
Boone & Crockett
Joined: Feb 2003
Posts: 15,295
Likes: 0
From: Mississippi USA
RE: recurve/longbow hard case?
You can substitute a screw-in cleanout for a hinged cap of you go with a pipe. Pipes work well for longbows, but it usualy takes something larger for a recurve.
Chad
Chad
Thread
Thread Starter
Forum
Replies
Last Post
PSEsilverhawk55
Traditional Archery
3
10-20-2005 12:28 AM
