Tuning ?
#1
Tuning ?
Ok I know I have asked this before but cant remember what it means. If I am getting alittle tailing to the left from my arrows, if it is the bow and not mewhat could it be?Should I move the brace height Up or down?
#2
Join Date: Dec 2003
Posts: 236
RE: Tuning ?
Are you talking about flight to the target or after it gets there? if the later I wouldn't worry about that, the target material can cause that. if not. Try brace height and/or knock point to start with. how is left to right, and how is flight with a broadhead?
#4
RE: Tuning ?
From Kelly's site:
If, back end of arrow kicks left horizontally, (Opposite is true for left handed shooter.) shortly after leaving bow, but then later corrects itself and flies straight there could be one of two problems. First off, re-check your brace height to see if it has decreased. If so, increase it until this characteristic disappears. Second, there could be a fletch contact problem with shelf and/or rest material. Observation of shelf material usually will indicate a contact/wear point if this is the problem. Remove, shorten or separate the shelf material until this characteristic disappears.
If, back end of arrow kicks left horizontally, (Opposite is true for left handed shooter.) shortly after leaving bow, but then later corrects itself and flies straight there could be one of two problems. First off, re-check your brace height to see if it has decreased. If so, increase it until this characteristic disappears. Second, there could be a fletch contact problem with shelf and/or rest material. Observation of shelf material usually will indicate a contact/wear point if this is the problem. Remove, shorten or separate the shelf material until this characteristic disappears.
Thread
Thread Starter
Forum
Replies
Last Post
killadoe
Bowhunting
0
05-21-2008 12:16 PM