was wondering guys if anyone has had this problem before not being able to get the right brace height or a/a.i preloaded limbs with the correct cable length and string length.i can get the a/a were it is suppose to be but unable to get the brace height right.im around 3/16 short.if i lengthen my string to try and get more brace height my a/a is off.i checked all the specs to make sure they were right but to no avail.

Don't you shorten the string to incease brace height?

Had you measured the specs when you first got the bow? They're not always exactly @ specs.

If it is a one cam bow I would make sure the cam is in the right position and then check specs.

the timing on my cam was way off is why i could not reach my maximum poundage so i did have to shorten my power cable to get my timing set just right and make a few adj. on my string length to get back to my normal draw and it gave me my brace height back.

Good for you!!! I'll bet it's spitting them out now.

yeah i am back to were i shoiuld be and my gladiator is definetly spitting them out and on the money