new 2004 pro 40 is in but......
#13
RE: new 2004 pro 40 is in but......
Sigep! trust me your in good hand's here these guy's got me my 2004 Pat dually in a hurry. These guy's will take this to another level ,you'll be happy
nubo
nubo
#16
Join Date: Oct 2003
Posts: 16
RE: new 2004 pro 40 is in but......
sigep1967,
I'm sorry you have a problem with your new bow.[:'(]
If there are too many twist in the cable the draw length should also be long. If so, just take a few twist out until it makes 64# and the draw length and pounds should be right. Or you can send it back and have the guys at the factory fix it.
Kevin Strother
I'm sorry you have a problem with your new bow.[:'(]
If there are too many twist in the cable the draw length should also be long. If so, just take a few twist out until it makes 64# and the draw length and pounds should be right. Or you can send it back and have the guys at the factory fix it.
Kevin Strother
#17
RE: new 2004 pro 40 is in but......
Sig,
Since you are getting new limbs...
When you/the dealer take the bow apart, measure the string and cables and make sure they are the correct length.
If not I would
A) contact BT and have them get you the correct lengths
and
B) for a quick fix since you need it for the shoot, you can likely take some twists out of the cables to where the harness is not so wound up and then put twists in the string to get the draw length right.
Please let me know how you make out
P.S. Don't be a stranger Kevin!
Since you are getting new limbs...
When you/the dealer take the bow apart, measure the string and cables and make sure they are the correct length.
If not I would
A) contact BT and have them get you the correct lengths
and
B) for a quick fix since you need it for the shoot, you can likely take some twists out of the cables to where the harness is not so wound up and then put twists in the string to get the draw length right.
Please let me know how you make out
P.S. Don't be a stranger Kevin!
#19
Thread Starter
Join Date: Oct 2003
Posts: 25
RE: new 2004 pro 40 is in but......
Well if it was a 1 cam bow I think I could untwist the cable and be ok but it is a dually and I am afraid that would throw it terribly out of time. It looks to have had about 6-7 extra twists if not more put into the split part. The split is only about 3" long just barely enough to clear the cam. I checked tha ata length and it seems to be ok.
#20
RE: new 2004 pro 40 is in but......
ORIGINAL: sigep1967
Well if it was a 1 cam bow I think I could untwist the cable and be ok but it is a dually and I am afraid that would throw it terribly out of time. It looks to have had about 6-7 extra twists if not more put into the split part. The split is only about 3" long just barely enough to clear the cam. I checked tha ata length and it seems to be ok.
Well if it was a 1 cam bow I think I could untwist the cable and be ok but it is a dually and I am afraid that would throw it terribly out of time. It looks to have had about 6-7 extra twists if not more put into the split part. The split is only about 3" long just barely enough to clear the cam. I checked tha ata length and it seems to be ok.
Sig,
Not if you untwisted both harnesses equally (which would put the cams out of the proper rotation but would keep them in synch) and then twisted up the string to get them back to the proper rotation.