Community
Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

sharpening G5' s

Thread Tools
 
Old 07-06-2003 | 08:02 AM
  #11  
rcd567's Avatar
Typical Buck
 
Joined: Mar 2003
Posts: 880
Likes: 0
From: Glenwood Iowa
Default RE: sharpening G5' s

I should have known better.[:' (] Kids...Don' t use drugs Seems like we' re a little off topic.[>:]

$18.76[:-]
rcd567 is offline  
Reply
Old 07-06-2003 | 10:04 PM
  #12  
Thread Starter
 
Joined: Feb 2003
Posts: 285
Likes: 0
From: Duluth Minnesota USA
Default RE: sharpening G5' s

I bought a diamond stone and used it for my G5' s and it worked like a charm..

Oh by the way... $18.76[:-]
btpatriot02 is offline  
Reply
Old 07-06-2003 | 10:07 PM
  #13  
Thread Starter
 
Joined: Feb 2003
Posts: 285
Likes: 0
From: Duluth Minnesota USA
Default RE: sharpening G5' s

OOPS I meant $18.77
btpatriot02 is offline  
Reply
Old 07-13-2003 | 08:24 AM
  #14  
rcd567's Avatar
Typical Buck
 
Joined: Mar 2003
Posts: 880
Likes: 0
From: Glenwood Iowa
Default RE: sharpening G5' s

Hey Geronimo,
Any luck on those G5' s yet? I' m going to do more flight testing this evening with mine. Good luck.

$18.81
rcd567 is offline  
Reply
Old 07-13-2003 | 10:51 PM
  #15  
Thread Starter
 
Joined: Feb 2003
Posts: 285
Likes: 0
From: Duluth Minnesota USA
Default RE: sharpening G5' s

I' ve done my sighting in with my G5' s on my hunting bow and all I can say is wow!! They fly like a dream I' ve shot them all the way out to 60 yds so far. They did not wobble at all and were consistent. I' m glad I changed from the steelforce broadhaeds that I was using last season.



{KNIGHTS OF THE ROUND TABLE}[8D]


$19.50[]
btpatriot02 is offline  
Reply
Old 07-14-2003 | 07:55 PM
  #16  
Geronimo's Avatar
Nontypical Buck
 
Joined: Feb 2003
Posts: 1,021
Likes: 0
From: longwood florida usa
Default RE: sharpening G5' s

RCD567, I' ve been too lazy to start applying the various techniques I' ve learned from these posts, but I will start tonight and let you know. Keep me informed about your tests, O.K.
Geronimo is offline  
Reply
Old 07-16-2003 | 04:27 PM
  #17  
 
Joined: Feb 2003
Posts: 4
Likes: 0
From: Edgewater Maryland USA
Default RE: sharpening G5' s

Make sure if you are using a diamond sharpener that you break it in before using it. You can do this be rubbing a flat piece of steel over the surface for a while. If you do not do this the scratch will be very irregular and more coarse than specified by the manufacturer. The absolute best sharpener for getting a finished edge on the Montec is the fine bench stone made by Spyderco. They make an extra-fine but it is not necessary to get a hair-shaving edge.
mfrey is offline  
Reply
Old 07-24-2003 | 07:01 AM
  #18  
Nontypical Buck
 
Joined: Feb 2003
Posts: 2,597
Likes: 0
From: Heaven IA USA
Default RE: sharpening G5' s

I have one in the 125 grain version that I use for practice that has a couple of flat spots on two of the blades from banging them into other heads. Without removing a lot of the metal I won' t be able to bring this head back to it' s peak sharpness. I did run it over the stone the other day and it came out plenty sharp. It won' t shave paper as some have described above but I guarantee it would go through a whitetail like a hot knife through butter.

I wondered how it would fly so I took it out back. With a slight breeze I was able to hit a 3" spot at 60 yards three times in a row starting with the first time I pulled the bow back in the experiement. The fourth shot missed by two or three inches and the experiment was over.
Antler Eater is offline  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BHunter32
Bowhunting
1
08-06-2005 06:47 AM
PSEsilverhawk55
Bowhunting
1
08-05-2005 07:58 AM
Rangeball
Traditional Archery
2
11-30-2004 10:12 AM
RTA47
Technical
1
08-31-2004 02:58 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.