How do you change draw length on a guardian
12-11-2008 | 06:22 PM
#2
Typical Buck
Joined: Feb 2003
Posts: 528
Likes: 0
From: Seattle, WA
RE: How do you change draw length on a guardian
ORIGINAL: jhall3994
I just bought an 08 guardian i was wondering how to change draw length and adjust the let off
I just bought an 08 guardian i was wondering how to change draw length and adjust the let off
http://www.bowtecharchery.com/downloads/BT08_ModPost.pdf
12-11-2008 | 07:14 PM
#3
Nontypical Buck
Joined: Mar 2008
Posts: 1,760
Likes: 0
From: Henderson, KY
RE: How do you change draw length on a guardian
Take your bow to a bowtech bowshop and they should change them for you for really cheap if not, for free. Its reall simple to do, but bt shops will have them and be able to change them in a matter of minutes.
Derek
Derek
12-11-2008 | 10:14 PM
#5
Nontypical Buck
Joined: Mar 2008
Posts: 1,760
Likes: 0
From: Henderson, KY
RE: How do you change draw length on a guardian
The mods are really easy to change/setup. Its only 3 allen screws. Just be SUPER careful you dont overtighten adn strip them out! Its a major PITA if you do.
Derek
Derek
12-12-2008 | 03:28 PM
#7
Typical Buck
Joined: Feb 2003
Posts: 528
Likes: 0
From: Seattle, WA
RE: How do you change draw length on a guardian
Hmm... Looks like there is no post setting for the Guardian. You might not be able to adjust the letoff. My friend had an 07 that I can check.
Either way, you'll need your dealer to order the modules for you. Unlessyou buy them from someone else. It's better to learn how to work on your own equipment anyway.
Either way, you'll need your dealer to order the modules for you. Unlessyou buy them from someone else. It's better to learn how to work on your own equipment anyway.
