bowtech string problem
#1
Typical Buck
Thread Starter
Join Date: Feb 2008
Location: outback Australia in england now
Posts: 603
bowtech string problem
recently had to do some reserving on a friends bowtech solocam bow when we put the bus cables and string back on the the draw length changed and we had to move the nocking point up and its way high above square he shoots fingers so have i made an adjustment wrong is there a spec page i can look on any help would be great
the nock point was much lower before the change it has moved up the string about half an inch
can anyone help with specs or an idea why this has happened
the nock point was much lower before the change it has moved up the string about half an inch
can anyone help with specs or an idea why this has happened
#4
Typical Buck
Thread Starter
Join Date: Feb 2008
Location: outback Australia in england now
Posts: 603
RE: bowtech string problem
it was independence model i need specs on string and cable length etc to try and sort this problem also if possible will need a diagrahm of how the string config is on bottom cam to ensure all is correct can anyone help please