Arrow selection
01-04-2008 | 10:48 AM
#11
Thread Starter
Senior Member
Joined: Mar 2007
Posts: 129
Likes: 0
From: Bruce Co., Ontario, Canada
RE: Arrow selection
Thanks for the advice guys. Went with the beman 340's and 100 gr tips. With a 28" draw and drop away rest set about 1.5"behind the riserbow the guy at the shop recommended 29.5" shafts as measured off the end of the riser 1", is that correct? Was thinking I should go with a shorter shaft because there is lots of clearence but he said no way. Thanks again.
01-04-2008 | 10:55 AM
#12
Giant Nontypical
Joined: Jun 2007
Posts: 7,367
Likes: 0
From:
RE: Arrow selection
ORIGINAL: Campbery
Thanks for the advice guys. Went with the beman 340's and 100 gr tips. With a 28" draw and drop away rest set about 1.5"behind the riserbow the guy at the shop recommended 29.5" shafts as measured off the end of the riser 1", is that correct? Was thinking I should go with a shorter shaft because there is lots of clearence but he said no way. Thanks again.
Thanks for the advice guys. Went with the beman 340's and 100 gr tips. With a 28" draw and drop away rest set about 1.5"behind the riserbow the guy at the shop recommended 29.5" shafts as measured off the end of the riser 1", is that correct? Was thinking I should go with a shorter shaft because there is lots of clearence but he said no way. Thanks again.
Dan
