drhoyt

when installing one how do you get it to come back square, i want to get rid of my one with the tubing.

thanks for any help

dan

mobow

If the string is shot in, and the peep is installed correctly, it shouldn't be a problem.

drhoyt

the string is 2 years old and if i take the tube off of mine it doesn't come back square.

Madjac20

Do you use a "D-Loop? If so, try rotating the "D-Loop" to square up the peep.

mobow

You may need to put a half twist on the string......Or, you may need a new string. As I mentioned, it should open if installed correctly.

Oh, did you install a new peep, or are you trying to use the tube peep w/out the tube? If you are, install a new one that isn't designed for use w/ the tube.

gibblet

whatever you do, don't try and drill the peep out to make it bigger w/ a power drill after you've installed it. if you want to know why - you can ask me, davec, or the rev - the newest member of the club.

drhoyt

the peep i am going to use is not made for a tube. if i twist the string i twist from the top cam right? is it possible to twist it to much

thanks

gibblet

doesn't matter which end you use if its a dually, binary, or hybrid. you need put in half twist, take it out of the press, see if its right - if its not - put in another half twist and check again.

KodiakArcher

Do you know what material the string is made of? After 2 years of shooting the creep should be gone out of it but then 2 years is about when I replace my strings anyway. I'd be thinking about replacing it with something that doesn't creep like 452x, UltraCam or X-Cel...

Ed McDonald

Maybe I was just lucky but I installed a Shurz-a-peep on my bow. I bought a string separator at Gander Mt for 6 bucks and divived the string into 3 equal ( I hope ) sections and installed the peep . It worked out great .