qad ultra rest?
#12
Nontypical Buck
Joined: Feb 2003
Posts: 1,375
Likes: 0
From: Onamia,MN.
Don't know if the three ?'s are for me but my draw length is 30,brace is 7.5,and speed has never been verified but the certificate states it shoots [email protected]#'s.I'm shooting at about 68#'s with 29" beaman ics hunters and 100gr. 3-blade muzzy's.
#14
jsaker, I would agree that you have a timing/setup issue. If you had a really short drawlength, it may cause a problem with the rest falling away quickly enough but you shouldn't have any problems with a 30" draw. Make sure that the cable is pulling the rest up during the last inch of your draw cycle.
#16
Joined: Feb 2003
Posts: 12
Likes: 0
From: Madison WIsconsin USA
I had clearance problems with mine until I e-mailed the company and they sent me a detailed PDF file of instructions on setup. The package instructions don't cut it. I Followed those instructions and have complete clearance now. I'm shooting a bowtech tech 29 at 70 lbs at 27 draw. I shot the best buck of my life with this thing. Now I just draw and not worry about anything falling off. Not to say others wouldn't do the same thing, but I'm very satisfied with this rest.
#17
Joined: Dec 2006
Posts: 63
Likes: 0
Mine has performed flawless and I wont even consider another rest now. However if your shooting a larger diameter arrow and you have mole skin or felt on your launcher and the bar you may get fletch contact with the bar across the top. When i switched from carbons to 2314's i had to take the felt off for my quickspins to avoid contact. And i recomend a lot of tension on this rest and to set it pretty tight on the cable when first setting it up considering that it does have a cocking mechanism which causes it to drop slower than some. If you have a bow with a longer brace height and and your draw length is on the short side i suggest tightening the rope so tight thats its almost hard to even move with your fingers and then draw the bow back and continue. I had to do this when i had my justice for best performance.




