Go Back  HuntingNet.com Forums > Archery Forums > Technical
 need a pic of a patriot or extreme 03!! >

need a pic of a patriot or extreme 03!!

Technical Find or ask for all the information on setting up, tuning, and shooting your bow. If it's the technical side of archery, you'll find it here.

need a pic of a patriot or extreme 03!!

Old 08-14-2005, 08:23 PM
  #1  
Fork Horn
Thread Starter
 
brad patriot's Avatar
 
Join Date: Sep 2004
Location:
Posts: 141
Default need a pic of a patriot or extreme 03!!

does anyone have a couple pics they can send me of a patriot or a extreme?I took my string off and I think I might have put it back on wrong.you can send pics to [email protected] thanks
brad patriot is offline  
Old 08-14-2005, 10:17 PM
  #2  
 
Join Date: Jun 2005
Location:
Posts: 104
Default RE: need a pic of a patriot or extreme 03!!

Go to the bowtech webstie to the download area and you can download the manual for a few years back. Maybe it will show you in there?
utah300rum is offline  
Old 08-14-2005, 11:54 PM
  #3  
Boone & Crockett
 
bigbulls's Avatar
 
Join Date: Feb 2003
Posts: 10,679
Default RE: need a pic of a patriot or extreme 03!!

Look at the string. You will see the center serving. The loop that is closest to the center serving goes down around far left groove of the cam and attaches to the post. Then run the rest of the string around the idler wheel (outside to inside) and down to the far right (right handed bow) groove on the cam. BOTH ends of the string will be on the same side (shooter or rear) of the cam.

The cable will attach to the axel at the top and the single loop will attach to the cam. The difference here is that the single loop end will run to the middle groove but rather than being closer to the shooter it will be on the inside of the bow.




bigbulls is offline  
Old 08-15-2005, 12:27 PM
  #4  
Fork Horn
Thread Starter
 
brad patriot's Avatar
 
Join Date: Sep 2004
Location:
Posts: 141
Default RE: need a pic of a patriot or extreme 03!!

thanks for the info!!! I found out what I did wrong I had my string and cable crossed above the the cable guard instead of below it.
brad patriot is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.