40s&w
03-22-2010 | 01:53 PM
#32
Banned
Joined: Mar 2010
Posts: 128
Likes: 0
From: In a big house
03-22-2010 | 03:42 PM
#33
Nontypical Buck
Joined: Oct 2007
Posts: 4,894
Likes: 0
From: central and east texas
i have an xdm, and it didnt pass the sand test, after my re-load experience, i have never ran another re-load through any of my guns. maybe if i were doin it myself i might see.
03-22-2010 | 05:45 PM
#34
Nontypical Buck
Joined: Jan 2008
Posts: 1,408
Likes: 0
From:
As for the brass, I probably get around 5 reloadings before I lose them in the grass. I shoot with 3 other guys using G23s and a Kel-Tec 40 carbine, and I'm the only one who reloads. So lots of brass.
03-23-2010 | 08:29 AM
#36
Nontypical Buck
Joined: Feb 2003
Posts: 3,067
Likes: 0
From: Garfield NJ USA
03-23-2010 | 09:09 AM
#37
Banned
Joined: Mar 2010
Posts: 128
Likes: 0
From: In a big house
After 4 pages of posts, and a conversation that's gone beyond the topic, people still chime in about the original question. OP had the answer on Post #5. It seems that the holier than thou, high posting count crowd chimes in when they like, followed by those who never bothered to read the thread.
No response needed, as you both bore me.
Regards,
Ris
No response needed, as you both bore me.
Regards,
Ris
03-23-2010 | 09:23 AM
#38
Guest
Posts: n/a
After 4 pages of posts, and a conversation that's gone beyond the topic, people still chime in about the original question. OP had the answer on Post #5. It seems that the holier than thou, high posting count crowd chimes in when they like, followed by those who never bothered to read the thread.
No response needed, as you both bore me.
Regards,
Ris
No response needed, as you both bore me.
Regards,
Ris
03-23-2010 | 11:09 AM
#39
Nontypical Buck
Joined: Jan 2008
Posts: 1,408
Likes: 0
From:
After 4 pages of posts, and a conversation that's gone beyond the topic, people still chime in about the original question. OP had the answer on Post #5. It seems that the holier than thou, high posting count crowd chimes in when they like, followed by those who never bothered to read the thread.
No response needed, as you both bore me.
Regards,
Ris
No response needed, as you both bore me.
Regards,
Ris
You prompted the unsupported chamber discussion by the inferrence that it had no bearing on "normal" loads. It certainly does, if that "normal" load is in a case fired a dozen times.
If you are uncomfortable with your ignorance being educated, you may elect to push back from your keyboard and not make it evident to those that know better. Other people need to understand these things if they are going to reload safely.
03-23-2010 | 11:37 AM
#40
Banned
Joined: Mar 2010
Posts: 128
Likes: 0
From: In a big house
Whenever someone starts talking of reloading for a Glock, the chamber issue is completely relevent and typically arises.
You prompted the unsupported chamber discussion by the inferrence that it had no bearing on "normal" loads. It certainly does, if that "normal" load is in a case fired a dozen times.
If you are uncomfortable with your ignorance being educated, you may elect to push back from your keyboard and not make it evident to those that know better. Other people need to understand these things if they are going to reload safely.
You prompted the unsupported chamber discussion by the inferrence that it had no bearing on "normal" loads. It certainly does, if that "normal" load is in a case fired a dozen times.
If you are uncomfortable with your ignorance being educated, you may elect to push back from your keyboard and not make it evident to those that know better. Other people need to understand these things if they are going to reload safely.