270 wsm accubond loads?????
04-01-2007 | 06:37 AM
#1
Thread Starter
Joined: Apr 2007
Posts: 110
Likes: 0
From: wv
270 wsm accubond loads?????
HI EVERYONE I AM NEW TO THIS FOURM AND I THINK ITS GREAT. I JUST BOUGHT A NEW 270WSM AND WAS THINKING OF LOADING NOSLER 130 GR ACCUBONDS IN IT FOR WV WHITETAIL.IF ANYBODAY HAS ANY INFO ON THEM IT WOULD HELP ALOT THANKS
04-02-2007 | 05:20 PM
#2
Nontypical Buck
Joined: Aug 2005
Posts: 2,862
Likes: 0
From: South Dakota
RE: 270 wsm accubond loads?????
That bullet will work very well for deer. I load my buddies 270WSM with that same load, and it shoots very tight groups, and kills very well.
Did you need load info?
Did you need load info?
Rammer, YES ANY INFO OR LOADS YOU HAVE FOR THE 270 WSM WOULD BE AWESOME. THANKS
04-02-2007 | 07:51 PM
#4
Nontypical Buck
Joined: Aug 2005
Posts: 2,862
Likes: 0
From: South Dakota
RE: 270 wsm accubond loads?????
I just went by the Nosler load book when I worked up his load for him.
I went with IMR 4350
Min - 59.0gr @ 3051fps (most accurate load tested in the book)
Max - 63.0gr @ 3294fps (load I used in my buddies Weatherby)
Winchester cases
Win WLRM primer
Shoots nice lil clovers at 100.
If I was you I would start at 61grs and work up to the max of 63grs, I load for a few other short mags and some of them can't reach max load without some pressure signs.
I went with IMR 4350
Min - 59.0gr @ 3051fps (most accurate load tested in the book)
Max - 63.0gr @ 3294fps (load I used in my buddies Weatherby)
Winchester cases
Win WLRM primer
Shoots nice lil clovers at 100.
If I was you I would start at 61grs and work up to the max of 63grs, I load for a few other short mags and some of them can't reach max load without some pressure signs.
