REMINGTON BULLETS 30-06 HAND LOADS

Reply Subscribe

Thread Tools

11-01-2006, 02:09 PM

lonewolf5348

Typical Buck

Thread Starter

Join Date: Jun 2006

Posts: 882

REMINGTON BULLETS 30-06 HAND LOADS

was wondering if anyone has any loading data for the 150 grain PSP bullet
in the 06?? (remington bulk bullets)

11-01-2006, 03:17 PM

kelbro

Fork Horn

Join Date: Jul 2004

Location:

Posts: 422

RE: REMINGTON BULLETS 30-06 HAND LOADS

What powder are you wanting to use? I like the H4350 for 150s in the '06.

11-01-2006, 06:05 PM

alsaqr

Join Date: Sep 2006

Location: Western OK

Posts: 856

RE: REMINGTON BULLETS 30-06 HAND LOADS

I have used 46.2 grains of IMR 3031 with this bullet. Try a Winchester case, and Winchester LR primer. Have found this load to be very accurate in my guns.

11-02-2006, 03:21 AM

lonewolf5348

Typical Buck

Thread Starter

Join Date: Jun 2006

Posts: 882

RE: REMINGTON BULLETS 30-06 HAND LOADS

alsaqr: that almost my load with the hornady 165 SP
I use 45 grains of 3031 any idea on the FPS

11-02-2006, 05:24 AM

alsaqr

Join Date: Sep 2006

Location: Western OK

Posts: 856

RE: REMINGTON BULLETS 30-06 HAND LOADS

lonewolf: My old Hornadymanuallists their150grain bullet and 46.2grains of IMR 3031 at 2800 fps. I think that it is more like 2700: A good deer killer.

11-02-2006, 05:41 AM

Mykey

Nontypical Buck

Join Date: Feb 2003

Location: NC

Posts: 1,284

RE: REMINGTON BULLETS 30-06 HAND LOADS

I've had very good results with my 30.06 using RL19, IMR4064 & IMR4350 with bullets in the 150gr range and up.My pet load for this rifle iswith a 130gr Hornady SP in combination with IMR4064.